Availability of Installation Video for Progressive Dynamics 4000 Series RV Converter

Question

Question:

Good morning. The video review of the Power Dynamics PD4045CSV converter is helpful…thank you. Do you have or know of a video of an installation? Etrailer is always a great resource. Thanks, Ken

asked by: Ken M

0

Expert Reply:

Hey Ken, welcome back! If you're referring to the Progressive Dynamics 4000 Series RV Converter # PD4060K you were looking at I have attached an installation video further down on this page.

If you're asking about the Replacement Converter Section # PD4045CSV you ended up purchasing, we do not have an installation video at this time. The only thing I can offer is the installation instructions from Progressive Dynamics. See the attached picture. You should receive a copy in the box as well.

Any big trips planned once you get the converter section swapped out?

expert reply by: Robin H

0

Installation Instructions
(click to enlarge)

Ken M.

4/20/2026

Hi Robin...I appreciate the quick response and help! I was asking about the PD4045CSV, but the video on the other gave me an idea. I was weighing the "can I do it myself or need a pro?" part of the equation. Not sure I'll try tackling the unknown by myself. Unfortunately we got to our camping destination about 4.5 hours from home before we knew something was wrong. We're making do with a charger and swapping batteries every 12 hours to get through this trip. Hopefully we'll get it fixed before the next one in May. Thanks again for your assistance...y'all are always super helpful. Ken

Robin H.

4/20/2026

@KenM oh man, that is the worst. At least you got everything going with a separate charger, most people don't even have that. You might be able to find some videos on YouTube if someone else installed one of these that could help you decide. If you aren't feeling confident, go ahead and hire someone and save yourself the trouble. I went ahead and attached our installer locator here for your reference.

Helpful Links

installer/near-me/

Answer 1

Hey Klara! Yes, the Replacement Main Board Assembly for WFCO Auto-Detect RV Power Centers #WF76FR will fit your WFCO 8955PEC. This is just a variation of the 8955 model so this main board will work as a drop-in replacement. Did yours fail or are you…

view full answer...

Answer 2

Hey Jeff, The WFCO WF-8955PEC isn't lithium compatible so that's why your battery isn't fully charging. You can replace the converter section with the Progressive Dynamics #PD4655V and then move the black jumper over to the 'LI'…

view full answer...

Answer 3

Hi Steve, There unfortunately isn't a replacement converter section for available for your Magnetek 3240 so you'd either need to replace the entire panel with one like the Progressive Dynamics #PD4045KA or use a standalone converter like the…

view full answer...

Answer 4

If you're wanting to replace your ShurFlo 2088-403-444 then the Flow Max RV Fresh Water Pump #LC689052 would be a great replacement. It has a 3.0 GPM and a rating of 50 PSI, which will give you a slightly better performance than your SHURflo…

view full answer...

Answer 5

So the #PD4045CSV was recently redesigned so that it could switch between lithium batteries and non-lithium batteries where in the past it was only non-lithium. This is why other part number is getting discontinued.

view full answer...

Answer 6

Hi John; we do not have an installation video for the Replacement Converter Section for Progressive Dynamics Inteli-Power 4000 Series 45 Amp Power Center #PD4045CSV yet. The only thing I can offer at this time is the installation instructions from…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Availability of Installation Video for Progressive Dynamics 4000 Series RV Converter

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching