bing tracking image
  1. Accessories and Parts
  2. WFCO
  3. Power Converter
  4. Board Assembly
  5. 55 Amp
Replacement Main Board Assembly for WFCO Auto-Detect RV Power Centers - 55 Amp
WFCO

Replacement Main Board Assembly for WFCO Auto-Detect RV Power Centers - 55 Amp

Part Number: WF76FR
In Stock
$248.99
Retail:$363.49
You Save: $114.50
Accessories and Parts
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
When charging problems point to a failing converter, this replacement main board lets you restore your WFCO WF-8955 power center without replacing the full panel, keeping the repair simple and familiar. 1-800-940-8924 to order WFCO accessories and parts part number WF76FR or order online at etrailer.com. Free expert support on all WFCO products. Great prices and Fastest Shipping for Replacement Main Board Assembly for WFCO Auto-Detect RV Power Centers - 55 Amp. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (28)
  • Q & A (0)
  • Videos (1)
  • Photos

WFCO Accessories and Parts - WF76FR

  • Power Converter
  • Board Assembly
  • WFCO
  • 55 Amp

When charging problems point to a failing converter, this replacement main board lets you restore your WFCO WF-8955 power center without replacing the full panel, keeping the repair simple and familiar.


Highlights

  • Replacement Main Board for WFCO WF-8955: Restores charging and DC power without replacing the entire power center.
  • 55-Amp Converter Output: Delivers reliable DC power and proper battery charging for everyday RV use.
  • Auto-Detect Charging for Lithium & Lead-Acid Batteries: Automatically applies the correct charging profile with no switches or setup.
  • Clear-Cut Board-Level Replacement: Installs with two screws and minimal wiring, keeping the repair straightforward.
  • Built-In Reverse Polarity Protection: Includes an audible alarm to help catch wiring issues during installation.

Feature to Know About

A Targeted Fix When the Converter Is the Problem

When a WFCO WF-8955 power center stops charging batteries properly, it's easy to assume the entire panel needs to be replaced. In many cases, the issue is isolated to the converter board itself. This replacement main board lets you restore proper charging and DC power without pulling out the full power center or reworking existing wiring. It's built to current electrical safety standards and supports hi-pot testing, giving added confidence that everything is properly insulated and isolated once installed. The result is a repair that keeps the original enclosure, breakers, and fuse layout in place while restoring safe, reliable charging performance.

Specs:

Dimensions & Weight:

  • Overall dimensions: 9-1/2" wide x 7-1/8" long x 4" tall
  • Weight: 5 lbs

Converter & Charging:

  • Application: WFCO WF-8955 power centers
  • Battery compatibility: lead-acid (flooded, AGM) and lithium
  • Charging control: automatic battery type detection
  • Output current:
    • Lead-acid: 55 amps
    • Lithium: 50 amps
  • Output power: 950 watts
  • DC voltage range:
    • Lead-acid: 13.2V to 14.4V DC
    • Lithium: 13.6V to 14.6V DC
  • Charging stages:
    • Lead-acid: 3-stage charging
    • Lithium: 2-stage charging

AC Input:

  • Input voltage: 105V to 130V AC, 60 Hz

Safety & Protection:

  • Reverse-polarity protection with audible alarm
  • Meets current RVIA and NEC requirements

Certifications & Compliance:

  • UL and cUL certified
  • FCC Class B compliant

Warranty:

  • 2-Years from date of purchase


WF-8955-AD-MBA Replacement Main Board Assembly for WFCO 8955 RV Converter Chargers - 55 Amp DC Output

Installation Details WF76FR Installation instructions



Video of Replacement Main Board Assembly for WFCO Auto-Detect RV Power Centers - 55 Amp
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of WFCO RV Power Converter - WF76FR

Hi everyone, Steven here with etrailer. Today we're taking a quick look at a main board replacement assembly for the WFCO auto detect RV converter chargers, specifically the 55 amp ones. So folks, this main board assembly will only work with those WFCO WF-8955 power centers, and it uses the auto detect technology to recognize your battery's chemistry and then automatically adjust the charging profile to match. So, you pretty much probably already know that 'cause, again, this is just a replacement circuit board assembly. Of course, you got your fan here, all your wiring, and then of course the main circuitry. And then, of course, it sits on the plastic base.

Now when I measured this insert I got overall, again, we're counting that base here, it's the widest point, I got 9 1/2 wide, 7 1/8 wide this way, front to back, and about four inches tall over all. So again folks, this is a great option for you. This is the replacement main board assembly for the WFCO Auto detect 55 amp RV converted chargers. I'm Steven. Reach out if you have questions about this or any other products, and have a great day.

.

Customer Satisfaction Score:

Ratings & Reviews

4.9

28 reviews
Review sort icon
When charging problems point to a failing converter, this replacement main board lets you restore your WFCO WF-8955 power center without replacing the full panel, keeping the repair simple and familiar.

by:



by:



by:



by:

A perfect drop in replacement and good customer service.

Claire H. profile picture
Etrailer Expert

Claire H.

8/21/2026

Glad to hear it was a perfect fit and an easy replacement! Thanks for the kind words about our customer service too. We appreciate it!



by:

Great fast professional service!!



by:

Haven’t installed it yet, but the delivery was three days early.
Looks like an excellent start.



by:

This device went in easier than I thought and I look forward to a continuing friendship, customer seller relationship



by:

Worked great, direct replacement.



by:

Product is a perfect stock oem replacement ! Works great



by:

Very Helpful information before the purchase. Friendly. I had a couple of questions after the purchase and still very helpful.



by:

Received order earlier than expected. Very simple install and works great so far.



by:

Exactly what I needed to replace the converter on my 2016 Rpod 179. And now I can use other batteries with the auto detect!



by:

Works better than my original controller ever did. Easy to install. Wires were bundled nicely.



by:

This is an easy install. Tested and works well with lithium battery. An upcoming camping trip will be the real test.



by:

I received my converter last week and installed it over the weekend. My furnace would surge a constantly when hooked up to shore power. Ran fine on on battery power. Installed the new converter and have no issues with the furnace surging when on shore power. The old one is 19 years old. Thanks etrailer and WFCO.



by:

I received the RV power center quickly, it installed very easily and works great! Thanks for the Great service!!



by:

Etrailer does it right with videos of their products. Product was sent on time and happy with Etrailer.



by:

Awesome service first with landing gear then steps and now converter main bord 20 minits 5 wires up and running properly with new lithium battery. E trailer for all my 5th wheel parts. Thanks



by:

The PDU arrived on Monday and I installed it that night.
The PDU is a direct ft replacement for my 20yr old one. No issues at all with the install (take pics beforehand to be sure all wires are connected correctly).
I had fully discharged LoPo house batteries and the system detected and charged them (running the generator)



by:

USPS is still snail mail, it took 8 days to arrive. Yikes!
Anyway, this converter took just a few minutes to install and worked amazingly!
etrailer had good information and a great price and was my 2nd choice after WFCO who still offered much advice as well.
Thanks etrailer!



by:

So far, I am very happy with it. It is a direct replacement just pulled the old one out and put the new one in and hook it up. No messing with anything strange. And the automatic part for the batteries is functional, and it does work. If you start with fully charged batteries and then cycle once or twice, the charger will know what kinds you have. I charged them accordingly, and if you decide to change the type of battery from, let's say, lead to lithium again. Start with a fully charged battery and then after it cycles once or twice it will automatically know what kind of battery is in there
At least it did for me.



by:

Works flawlessly and very easy installa tion.

Lazer S. profile picture
Etrailer Expert

Lazer S.

8/19/2026

Glad to hear it's working well for you, Greg! What did you install this in?

Greg G. profile picture

Greg G.

8/19/2026

2021 Rockwood Roo 19. Also have 190W solar roof panel with Go Power controller with Lithium charging profile.


by:

It appears to work though I don’t know where to find the led mentioned in the manual. Install is easy. Takes 30 min at most. Without knowing where to see the led lights I can’t confirm which mode I am using though it is putting out a charge



by:

Order status from eTrailer was great - never any question about status of my order or shipping information. They shipped it same day I ordered it. I ordered this after reading on eTrailer's website is was a direct swap out for my Power Center which had a Lead Acid only converter board - this one is an Autodetect model and support Lithium. It was a -direct- swap and very easy to do with only basic tools and about 15 minutes.



by:

Direct replacement for my non Lifepo4 converter. Took about 30 minutes to swap out, including putting drivers away cleaning up. Was a bit worried about the "auto detect" but it charged my LiTime Lifepo4 100ah battery to 100% on the first charge! Beware of sharpening edges, it can/will cut you.


25
25

See what our Experts say about this WFCO Accessories and Parts

  • Lithium Compatible Converter Replacement For WFCO WF-8955 55amp Converter
    Hey Lloyd, thanks for reaching out. We have just the thing. You can replace the main board assembly to make your WF-8955 compatible with Lithium batteries. For that you will need the following: - Replacement Main Board Assembly for WFCO Auto-Detect RV Power Centers - 55 Amp # WF76FR This will replace the converter section and allow it to work with lead-acid (flooded, AGM) and lithium batteries. It has an automatic battery detection feature, so you don't have to mess with switches or jumpers....
    view full answer...
  • WFCO WF-8955-AD-MBA Converter Is Showing Green Light When Charing Lithium Batteries
    Hey Richard, thanks for reaching out. If the WF-8955-AD-MBA # WF76FR is still showing green after you installed it and discharged the batteries to around 30%, the first thing I'd check is whether the converter is actually seeing the batteries as lithium. The auto-detect WFCO boards don't switch to lithium mode instantly. They have to observe the battery voltage and charging behavior over a period of time before they'll change modes, and sometimes that can take several charge/discharge cycles. So,...
    view full answer...
  • Will Replacement Main Board Assembly Fit WFCO 8955PEC
    Hey Klara! Yes, the Replacement Main Board Assembly for WFCO Auto-Detect RV Power Centers # WF76FR will fit your WFCO 8955PEC. This is just a variation of the 8955 model so this main board will work as a drop-in replacement. Did yours fail or are you switching to lithium?
    view full answer...
  • Which WFCO Replacement Converter to Allow Charging of Lithium Battery
    Hey Charlie, the correct part from WFCO to replace your 8955 with one that is Lithium compatible is the part # WF76FR actually. The overall dimensions of this are 9-1/2" wide x 7-1/8" long x 4" tall. This actually auto detects the battery type too so you won't have to worry about switching settings if you switch battery types!
    view full answer...
  • Can I Upgrade a WF-8955PEC-GE Converter for LiFePO4 Batteries with the WF76FR?
    Great question Mark, thanks for the details! Your WFCO WF-8955PEC-GE power center uses a removable converter section and the # WF76FR is the direct replacement main board assembly. It has WFCO's Auto Detect technology, which automatically switches between lead acid and LiFePO4 charging profiles, so it provides the lithium charging capability you're looking for without replacing the entire distribution panel. The Progressive Dynamics Replacement Section # PD4655V is also a compatible option...
    view full answer...


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Steven C
Installed by:
Steven C
Employee Mary K
Written by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Daron K
Updated by:
Daron K
Employee Michael B
Updated by:
Michael B
Employee Dawn Z
Updated by:
Dawn Z
Employee Amanda M
Edited by:
Amanda M

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.