Looking for Bearing Kit and Hub/Drum for 2023 Alpha Wolf 30dbh-l with 5,100 lb Dexter Axles

Question

Question:

I am looking for a bearing kit that fits this axle. Also a complete hub assembly for a spare. Thank you.

asked by: Ken D

0

Axle Tag
(click to enlarge)

Expert Reply:

Hey Ken, since you have a 5,100 lb axle the correct bearing kit you'd need would be the part # BK3-300.

The correct hub/drum replacement would then be the part # AKHD-655-6-EZ-K. From your tag I was also able to determine you have the 6 on 5-1/2 inch bolt pattern like what this hub has. What trailer is this for?

expert reply by: Jameson C

0

Ken J.

4/20/2026

This is for a 2023 alpha wolf 30dbh-l. Gvwr 9285.

Jameson C.

4/20/2026

@KenJ good to know thanks!

Answer 1

A replacement tang-style spindle washer like part #5-101 is intended to be installed behind the castle nut and have its prongs bent down so that they prevent the castle nut from rotating on an E-Z Lube type spindle. The castle nut holds the washer in…

view full answer...

Answer 2

Hey Andreas, I do not see an issue with the Roadmaster Comfort Ride #RM-2460-2580 working on your trailer. It is going to give you the upgraded support with better rated springs, and work well on your 3" axles. With these being better rated than…

view full answer...

Answer 3

We do indeed have the exact bearing kit you need for your Lippert 5,100 lb axle with the part #BK3-300.

view full answer...

Answer 4

There's crossover; the 15123 and LM67048 have the same inner diameter, so they fit the same spindle, and often hubs fit both 5,200 lb and 6,000 lb axles. So you are perfectly okay with what you have and the correct replacement bearing kit for…

view full answer...

Answer 5

Hi Robert; your Lippert axles use the #GS-2250DL grease seal or #RG06-070 for a pair. If you would prefer a Timken grease seal we also have the #TMK98ZR.

view full answer...

Answer 6

Thanks for the information and picture James! Your Curt 5,100 lbs capacity axle uses item #25580 inner bearings and item #LM67048 outer bearings. So you would need the Bearing Kit item #BK3-300, which includes both bearings, along with both races, a…

view full answer...

Answer 7

Hey Nicholas! You're referring to the Roadmaster 2630 for 3" axles from the installation instructions. Although we don't have the Roadmaster part, you can use the Dexter 3" Round Trailer U-Bolts (Qty 2) #SP01-060. We have confirmed…

view full answer...

Answer 8

Hey Bill, we have bearing kits for 5,200 lb axles like you have with the part #BK3-300 which comes with a new seal and the correct replacement bearings. If you wanted just the grease seal you'd want the part #GS-2250DL.

view full answer...

Answer 9

Yes, it is Allen and thanks for the pictures. The Bearing Kit item #BK3-300 is exactly what you need for a Dexter 5,100 lbs axle. This kit includes bearings, seal, races, and a cotter pin. You are correct you'll need one item #BK3-300 kit per…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Looking for Bearing Kit and Hub/Drum for 2023 Alpha Wolf 30dbh-l with 5,100 lb Dexter Axles

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching