Will Thule 753-3761 Load Stops Work With Thule WingBar Evo Roof Rack TH75KG?

Question

Question:

Hey, y’all. Will the Replacement Load Stops for Thule Aeroblade Load Bars, Ladder Racks, and Thule TracRac CapRac - Qty 4 Part Number: 753-3761 fit the TH75KG Thule ProBar Evo-style bars? Trying to out a combo together to carry my canoe. Want these bars, as they fit my 2025 tundra crew max hybrid, but unsure of the these load stops fitting the bars’ track system. Can you help? Thanks! Best, Ben

asked by: Ben L

0

Expert Reply:

Hello Ben, welcome back. Yes you are good. The # 753-3761 load stops will indeed work with the Thule WingBar Evo Roof Rack # TH75KG. The WingBar crossbars use a standard 3/4" T-slot which is exactly what the load stops are made to fit.

Those will work great for securing a canoe. You might want to think about adding a pad to the crossbar to protect the hull but that aside you will be good to go.

What kind of canoe do you have? Where do you paddle mostly?

expert reply by: Jesse M

0

Replacement Load Stops for Thule Aeroblade Load Bars, Ladder Racks, and Thule TracRac CapRac
(click to enlarge)

Ben L.

4/3/2026

Thanks, Jesse. I’m finally back to make good on your advice about the rack system for my naked-roofed tundra. Appreciate all the help, buddy! Best, Ben

Jesse M.

4/6/2026

@BenL Of course! Glad to help. You know where to find me if you ever need anything else!

Tyler

4/7/2026

@BenL Hi Ben, I have use the load stops for carrying my canoe. Work well but at least my canoe widens out a bit from the gunwale that sits on the cross bar so the top of the load stop vertical is the contact point to the canoe. The black paint of the load stop rubbed off on my canoe so I covered the vertical surface with an adhesive backed foam. Best, Tyler

Jesse M.

4/8/2026

@Tyler Hey Tyler, this is great feedback! Thanks for sharing!

See All (4) Replies to Ben L. ∨

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hello again Monty; I would get the black SumoSprings Custom Helper Springs #SS66PV. These have a capacity of 1,800 lbs so it gives you a bit over the blue without overdoing it. SumoSprings are a great choice if you don't want to go with the air…

view full answer...

Answer 4

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 5

Hey Brian! Yes, the Firestone Ride-Rite Air Helper Springs #F89VV will fit your 2025 Toyota Tundra. That is just the generic picture attached to that page, I can see how it would be confusing. These are designed to mount over the axle, and are…

view full answer...

Answer 6

Hey Scott, congrats on the new truck. I checked with Timbren's website and they do not go into specifics on how many spacers or what size you're going to need. The instructions for the Timbren Suspension Enhancement System item #T45MR say to…

view full answer...

Answer 7

Hey Eric, the K-Source Tow Mirrors part #KS48NQ that you referenced will fit your 2025 Toyota Tundra Platinum as long as it doesn't have extendable or telescoping mirrors. What are you towing?

view full answer...

Answer 8

Hey Tommy, you would choose the blue SumoSprings #SS46PV for lighter loads, daily driving, and a softer ride, ideal for occasional towing. While black SumoSprings #SS66PV are better for heavier trucks, frequent towing, and consistent loads, offering…

view full answer...

Answer 9

I checked with Timbren, and the overall height (from the top of the bracket that bolts to the frame to the bottom of the spring) is 6 inches for the Timbren Suspension Enhancement System #T45MR.

view full answer...

Answer 10

Hey Kirk, for the SumoSprings kit part #SS46PV that fits your 2024 Toyota Tundra you'd need to use the Timbren spacer blocks part #A25723-90AH00 to take up that extra space created by the lift. You'd need 4 of these per side as these are 1…

view full answer...

Answer 11

Hey David, I would test fit everything and see which orientation works best. With the spacer or without. Ideally when the kit is installed there will be 1 inch of space between the Timbren and the frame so whichever orientation gets closest to that…

view full answer...

Will Thule 753-3761 Load Stops Work With Thule WingBar Evo Roof Rack TH75KG?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching