Looking for Lift Kit for 2025 Grand Design 150 Series Model 270BN

Question

Question:

Good morning, do you sell a bolt on lift kit to increase ground clearance for a new 2025 Grand Design 5th wheel 150 series model 270BN? The rear vertical auto leveling jacks only provide about 5 of ground clearance when fully retracted.

asked by: mark c

0

Expert Reply:

Hey Mark, if you wanted a 2-1/4 inch lift for your Grand Design 5th wheel 150 series model 270BN we have the Correct Track Lift kit part # RR55QX. This bolts between the suspension hangers and the equalizers to add the additional lift. How much of a lift were you wanting?

expert reply by: Jameson C

0

Answer 1

Hey Richard, great question. To get the full 2-1/4" lift on a tandem axle setup, you actually need the triple axle kit part #RR55QX instead of the #RR23QX tandem axle kit. You could also achieve this by getting the tandem axle kit, and an…

view full answer...

Answer 2

Hey Kurt! Yes, the Correct Track Trailer Alignment and Lift Kit #RR55QX does require longer wet bolts like the #LC126197. This measures 3-3/8" from the bolt shoulder to the end of the bolt with 2-13/16" of usable length. Do you already have…

view full answer...

Answer 3

Hey Rick, welcome back. If you don't want to use the bolts included with the Correct Track Trailer Alignment and Lift Kit item #RR23QX or item #RR55QX, you can replace them with the 3-3/8" Replacement Wet Shoulder Bolt item #MR52HR. Using…

view full answer...

Answer 4

Yes, they have Dan. The alternative to the Lippert Correct Track is the Correct Track Trailer Alignment and Lift Kit item #RR23QX and item #RR55QX. These kits include brackets that attach to the spring hangers and lower the attachment point for your…

view full answer...

Answer 5

The equalizers on your triple axle setup will not be identical and there is nothing to worry about with your hanger spacing. However, since they appear to be worn it may be a good idea to go ahead and upgrade them. It looks like the Dexter E-Z Flex…

view full answer...

Answer 6

Never Fail Bushings have been discontinued, though they should not be used with wet bolts like the Wet Equalizer Bolt #126B2 or #34007-187-00. The lubricant would actually cause the bushings to degrade so the better course of action would be to use…

view full answer...

Answer 7

If you install the Correct Track Trailer Alignment and Lift Kit #RR23QX it will require longer bolts but MORryde makes a kit specifically for this. To find the right MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track you will…

view full answer...

Answer 8

The Lippert tandem axle lift kit part #RR23QX does not work with your MORryde CRE3000 suspension kit #MR87ZR.

view full answer...

Answer 9

Hey Michael, so the Curt Trailair part #LC155943 that you referenced was not designed to offer a different ride height from the pin boxes it replaces so it would not be the way to go if you were wanting to make a height adjustment. What I would do is…

view full answer...

Answer 10

The hangers will vary depending on the exact suspension set up from the manufacturer. With different spring combinations and number of axles used this will cause different parts to be required. These spring hangers are designed specifically for the…

view full answer...

Answer 11

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 12

Hey Dan! First of all, do you have your 5th wheel hitch and pin box fully adjusted? Make sure your 5th wheel is on the highest setting and you drop your pin box all the way down to help with clearance. Also, I'm guessing your leaf springs are…

view full answer...

Looking for Lift Kit for 2025 Grand Design 150 Series Model 270BN

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching