Recommended PullRite SuperGlide 5th Wheel Hitch for a Short Bed Truck w/out a Puck System

Question

Question:

Which pull rite super glide fifth wheel hitch fits a 2020, 2500 without pucks

asked by: Bill A

0

Expert Reply:

Hey Bill, welcome back! The PullRite SuperGlide 5th Wheel Hitch item # PUL63RR is exactly what you'll need for a short bed 2020 Chevy Silverado 2500 without the puck system. It will attach directly to a set of 5th wheel rails like the item # PUL59RR that also fits your Silverado.

The PullRite SuperGlide item # PUL63RR has a 20,000 lbs capacity and will provide you with 14" of travel. The additional turning clearance will ensure you don't hit the back of your cab when you're backing or making tight turns.

What kind of 5th wheel trailer do you have and what pin box is on it?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by: Jerred H

0

PUL63RR
(click to enlarge)

Bill A.

4/2/2026

Thanks for the reply Bill

Jerred H.

4/2/2026

@BillA You're welcome!

Answer 1

Congrats on the new truck! To add a set of 5th wheel rails to your 2024 Chevy Silverado 2500, I recommend the B&W Custom Installation Kit w/ Base Rails item #BWRVK2505. These are made in the USA and fit both the 6-3/4' and 8' bed models.…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 11

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Recommended PullRite SuperGlide 5th Wheel Hitch for a Short Bed Truck w/out a Puck System

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching