Is There A Weight Capacity For The Brophy Slide In Camper Tie-Downs HSSF?

Question

Question:

I have 2020 ram 2500 6.5. Bed Is there a weight limited for these tie downs im looking at either a Capri camper or the lance 650. Thank you gor your time.

asked by: Shonda V

0

Expert Reply:

Hello Shonda, thanks for writing in. There is not a specific weight rating for the Brophy Slide In Camper Tie-Downs # HSSF. They will work with any camper that is properly sized for your truck. So as long as the camper fits in the truck bed and weighs less than the trucks payload rating, you will be good to go and they will be safe to use.

You'll also need some bed mounted turnbuckles like the Brophy # TDHP.

What camper are you leaning towards? Any cool trips planned?

expert reply by: Jesse M

0

Brophy Slide In Camper Tie-Downs HSSF
(click to enlarge)

Shonda H.

3/17/2026

Im leaning towards lance 650 first on the fence about the capri camper. Need to get the camper then trips will be coming. Thanks for your help Jesse

Jesse M.

3/18/2026

@ShondaH Nice yea those lance campers are a very popular choice. How exciting! Thanks for sharing! You know where to find me if you ever need anything else!

Jesse M.

3/18/2026

@ShondaH Nice yea those lance campers are a very popular choice. How exciting! Thanks for sharing! You know where to find me if you ever need anything else!

Answer 1

You can use the Brophy Clamp On Camper Tie-Downs #HSAB for your 2018 Ford F-350 Super Duty but we actually recommend going with the Camper Tie-Downs #HSSF instead as they have a slightly different design that better fits your Super Duty. Attached are…

view full answer...

Answer 2

Hey David, we have the Torklift Front Camper Tie Down part #TL87CR that is a confirmed fit for your 2025 Ford F-350 long bed. How did you end up with just the rear set?

view full answer...

Answer 3

I reached out to Torklift and they have never had a fit for a Toyota Tacoma because their hitches are for capacities greater than that size truck can handle. This means that the camper tie downs compatible with their hitch will not work for you due…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Is There A Weight Capacity For The Brophy Slide In Camper Tie-Downs HSSF?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching