Will the Jacketed ABS Trailer Cable Per Foot Work w/the Pollak 7-Way Trailer Socket?

Question

Question:

will the Jacketed ABS Trailer Cable, Part Number: SWC89FR, work with the Pollak Black Plastic, 7-Pole, RV Blade-Style Trailer Socket, Part Number: PK12-707E?

asked by: David D

0

Expert Reply:

It sure will David! The Jacketed ABS Trailer Cable Per Foot item # SWC89FR will indeed work with the Pollak Black Plastic item # PK12-707E. The black, brown, yellow, and green wires are 12 gauge. The blue and red wires are 10 gauge and the white is 8 gauge. The item # SWC89FR wire is sold by the foot.

Looks like you're setting up a flat tow! Do you need any recommendations on additional parts like a tow bar?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by: Jerred H

0

Answer 1

I cannot speak of what function the wire colors represent on your trailer but I can say that on the 4-way trailer connector you have now; the white is for ground, the brown is for running lights, the yellow is for left turn/stop, and the green is for…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 9

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Will the Jacketed ABS Trailer Cable Per Foot Work w/the Pollak 7-Way Trailer Socket?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching