Will My Headlight Leveling Bracket on My 2025 F-150 Lariat Get in the Way of the Air Lift Air Bags?

Question

Question:

Hi! Im looking at your Air Lift LoadLifter 5000 Ultimate Air Springs AL67PD. My 2025 F-150 Lariat has the headlight leveling bracketry at the rear axle on the drivers side of the truck. Are these air springs compatible with my truck? Will the bracketry be problematic in any way? Thanks,

asked by: Skip A

0

Expert Reply:

Hello Skip,

Thanks for writing in! Welcome to etrailer, glad you found us.

The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle # AL67PD will be a great fit for your 2025 Ford F-150 Lariat. The great news is that the headlight leveling sensor bracket on the driver’s side of the axle will not interfere with the installation of this kit. I like that you are going with the Airlift, the brackets come in pieces, which makes install much easier in my experience.

The air spring brackets mount between the frame and axle and sit inboard of the factory headlight leveling sensor linkage, so the sensor and bracketry can remain in place and continue functioning normally. We’ve seen this setup on late-model F-150s and it does not create any fitment issues with the LoadLifter system.

If you wanted to pair them with an onboard compressor, check out the Air Lift WirelessAIR Compressor System for Air Helper Springs - EZ Mount # AL74000EZ, with the Bluetooth and Remote you don't even need to leave the cab to adjust the air.

What are you hauling that you are looking for the extra support, camper, boat, work gear, etc?

expert reply by: Kate F

0

Air Lift Air Bags on Ford F-150 Lariat
(click to enlarge)

Answer 1

For your 2022 Ford F-150, I recommend the: -Air Lift LoadLifter 5000 Ultimate Plus Air Springs w/ Internal Bumpers #AL54JQ. Reason being is that unlike the Air Lift LoadLifter 5000 Air Helper Springs #AL67PD, these springs have an internal jounce…

view full answer...

Answer 2

Hey Steve, The AirLift airbags with internal jounce bumpers are not able to be added to a system without so you would need to get a whole new system. With that said the system with the internal jounce bumpers is going to create a much rougher ride…

view full answer...

Answer 3

Hello again, Jack! The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle #AL54JQ will not fit your 2024 Ford F150 XLT 4x4 with the 5.0 V8 as it is specifically for the PowerBoost Hybrid engines (the top…

view full answer...

Answer 4

Hey David, That looks the ride height sensor, which looks at the weight being applied to the rear axle and adjusts the headlights to deal with the rear end sag pushing the headlights up. The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with…

view full answer...

Answer 5

We can definitely set you up with air bags for your 2021 Ford F-150. That said we do not have a 7,500 lb air bag kit for an F-150. Most F-150s can pull a max of around 14,000 lbs, and there would be no need to make an extra heavy duty kit for that…

view full answer...

Answer 6

Yes Todd, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL67PD will fit your 2023 Ford F-150 Tremor. These air bags have 5,000 lbs of load leveling capacity, an adjustable air pressure range of 5 to 100 PSI,…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Will My Headlight Leveling Bracket on My 2025 F-150 Lariat Get in the Way of the Air Lift Air Bags?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching