ISR Rails for 2012 Ford F-150 Wiith PullRite 2700 ISR Series SuperGlide

Question

Question:

I need help finding the correct ISR and hardware kit please fory pullrite super glide 2700

asked by: Adam J

0

Expert Reply:

Hi Adam, I can definitely help you out! The rails don't actually have to be from PullRite so you can use the Curt Custom Fifth Wheel Installation Kit for Ford F150 # C16441-204. This comes with ISR rails and then the hardware and custom mounting brackets you need for installation. If you don't already have wiring in your truck bed you'll want the Mighty Cord 5th Wheel/Gooseneck Wiring Harness # A10-7007 as well.

What kind of 5th wheel are you towing and where are you headed once you get the truck set up?

expert reply by: Robin H

0

5th Wheel Wiring 7-Way
(click to enlarge)

Adam J.

3/12/2026

It's an old 5th wheel camper, 2300 gvwr,Thor Tahoe superlite,I think.

Robin H.

3/12/2026

@AdamJ nice, those older Thor Tahoe Superlites are great little campers and super manageable for your F-150. Once you get the rails and wiring in, you’ll be all set! If you need anything else don't hesitate to reach out.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

ISR Rails for 2012 Ford F-150 Wiith PullRite 2700 ISR Series SuperGlide

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching