How Does Redarc Tow Pro Link Brake Controller Install 2021 Honda Ridgeline

Updated 03/12/2026 | Published 03/07/2026

Products Featured in This Question

Redarc Tow-Pro Link Bluetooth Brake Controller - Off-Road Mode - 4 Axles - Proportional

(16)

$399.00

Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector

(76)

$94.66

Question:

I am trying to connect the redrac tow pro link Bluetooth to a 2021 honda ridgeline and I do not see the way. Do I need anything for proper installation

asked by: Jesus P

Expert Reply:

Hey Jesus, does your 2021 Honda Ridgeline have a factory 7-way on it already? If not, you would need to install one like the Curt 7-way part # C56366 so that you can install the Redarc Tow Pro Link part # RED57AR which will install inline with the 7-way harness and the connector. Once that is complete you'd need to pair it to your smartphone and you'd be set.

expert reply by: Jameson C

7-Way
(click to enlarge)

Jesus P.

3/11/2026

Yes my truck has the factory tow packages and 7 way connector but it's a one piece body and nothing to unplug.

Jameson C.

3/11/2026

@JesusP You are going to have to make a USCAR connection on your 7-way wiring to be able to install the Redarc. You would want to use the part # C86DR for this. Take this connector and cut it in half and remove most of the wiring to either end but leave enough to make a new connection. You will then need to cut all of the wires that run to your 7-way and you are going to then wire in the two connectors mentioned previously. With them wired in you would then be able to install the Redarc Tow Pro Link in between them.

Jesus

3/11/2026

@JamesonC Can I use part #118288 instead?

Jesus

3/12/2026

@JamesonC Just to be safe. On the part 118288 i don't need to use fuses and relays if my 2021 honda ridgeline come with the factory tow packages. Am I right?