Changing My Hub to a 6 Lug From a 5 Lug With 3,500 lbs Axles
Updated 02/23/2026 | Published 02/19/2026 >
Products Featured in This Question
Question:
Hello. I have a f/w liepert ez-lub tandem 3,500lb axels 10inchs Drums 5 lugs... I NEED TO CHANGE THE DRUMS TO 6 LUGS SO I CAN GO TO 16 INCHS WHELL AND HAVE A BETTER CHOICE OVE PREMIUM TIRES.. WHAT DO I NEED TO DO THE JOB THANKS ANDRE
asked by: Andre E
Expert Reply:
Hey, Andre.
We have just the hub/drum for you! Since you have a 3.5k axle you will want the trailer hub and drum assembly part # TRU58AV.It come pre-greased so will make for a pretty easy install. This drum does use a typical bearing combination (inner bearing # L68149 and outer bearing # L44649) but I still recommend checking yours just to make sure.
Any reason why you want to go to a 16" wheel?
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 5,200-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- 25580 / LM67048
- Standard Grade
- For 5200 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Search Results: trailer jack
- Search Results: trailer axle spindle
- Search Results: wire grommet
- Video: Review of TruRyde Trailer Hubs and Drums - Hub with Drum - TRU58AV
- Shop: etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Video: Talking Pre-Greased Trailer Hub and Drum Assemblies with TruRyde
- Video: Review of TruRyde Trailer Hubs and Drums - Hub with Drum - TRU86AV
- Video: etrailer 7 Way Upgrade Kit With Junction Box Installation
- Search Results: trailer reverse light
- Shop: TruRyde Electric Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Search Results: for tandem~axle trailers trailer fenders
- Search Results: 7 wire
- Video: TruRyde Self-Adjusting Electric Brake Assembly Comprehensive Review
- Shop: TruRyde Electric Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
- Shop: Caliber Trailblazer ORV Tie Down Kit - 3,300 lbs - 4 Anchors
- Search Results: trimax
- Q&A: When Do Brakes Need to be Added to Both Axles of Tandem Axle Trailer
- Q&A: What is Required to Change the Bolt Pattern on Trailer Hubs
- Q&A: Do I Have to Adjust the TruRyde Electric Trailer Brakes?
- Q&A: How to Splice in Replacement 4-Way Trailer End Connector
- Q&A: Can Brakes be Installed on Only One of the Axles of a Tandem Axle Trailer
- Shop: Trailer Wiring
- Shop: Vehicle Lights
- Video: Review of etrailer Car Ramps - Loading Ramps - FHG55ZR
- Video: Feature Review Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles
- Q&A: Replacing Safety Chain Loops on Trailer That Broke Off
- Q&A: Can Trailer Breakaway Kit be Used without a Battery


