Looking for SumoSprings for 2021 Honda Pilot Elite AWD

Question

Question:

Hi, Ive 2021 Honda Pilot Elite AWD. Id like to get this to prevent rear sagging when towing. This suspension support made sense to me when comparing with air springs due to low maintenance and easy installation. Attached is the photo of rear axle. Space between middle coil-springs are about 1inch nearly flat and no load. Is this CSS-1125F compatible with rear axles of my Pilot? Thanks!

asked by: Omer

0

Expert Reply:

Hey Omer, since your 2021 Honda Pilot Elite AWD is AWD the correct SumoSprings kit you'd need is the part # CSS-1094.

expert reply by: Jameson C

0

Omer

2/26/2026

So I got CSS-1094 (different vendor) and it fit like a glove. FYI. Best,

Jameson C.

2/26/2026

@Omer Good to know! Thanks for passing that along!

Answer 1

Hi Steve! There are two options that will help the sag you are getting in your 2021 Honda Pilot when you are towing. The first is the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension #CSS-1125F. We have these listed as being for the…

view full answer...

Answer 2

Hey Oscar, yes we have the Coil SumoSprings part #CSS-1125F which is a confirmed fit for the rear suspension of your 2022 Honda Pilot. This installs between the coils and gives the vehicle additional suspension support. Are you towing a trailer with…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

They sure are Charlie and welcome back! The biggest inconvenience you're going to run into removing and reinstalling the Coil SumoSprings item #CSS-1125R are jacking up the rear end of your Subaru each time and removing the rear wheels. You will…

view full answer...

Answer 7

Hey Nick congrats on the new car! The bottom portion of the receiver for the Curt item #C69VV sits 11-3/4" above the ground when installed on your 2025 Subaru Outback Premium. If you're worried about ground clearance, I recommend installing…

view full answer...

Answer 8

Hey Andy, the bolts that come with the Demco Spare Tire Mount for up to 4" Trailer Tongue #DM15851-52 that you referenced are right at 4 inches long 3/8 inch diameter and are a fine thread. Did you lose yours?

view full answer...

Answer 9

Hey Lawrence thanks for the information! I wasn't able to find any good pictures of the inside of your Axle Tecknology BD2-655 drums. What you'll need to do is pull one of the hubs off and look at the inside. If they're smooth like the…

view full answer...

Answer 10

Hi Roni! For a hitch I recommend the Curt Trailer Hitch Receiver #C67JR. This has a nice clean look with the concealed cross tube and better clearance. It features a bolt-on installation and comes with a limited lifetime warranty. Then for a bike…

view full answer...

Answer 11

The Curt Class III hitch part #C67JR and EcoHitch - 2020 Subaru Outback Wagon part #EH34FR are both very similar as far as looks go on the 2020 Subaru Outback Wagon. They are both hidden cross tube designs so the only part of the hitch that is…

view full answer...

Looking for SumoSprings for 2021 Honda Pilot Elite AWD

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching