Replacement Seals for a Pace Edwards Bedlocker Tonneau Covers

Question

Question:

I have a Bedlocker cover on my 2024 GMC Sierre 2500. I thought I needed a replacement tailgate seal. However while watching the video on replacing the seal I noticed that the side rails do not have the caps you show in the video. This would explain why it leaks around edge of tailgate. I have tried to find the proper part number to purchase replacements. Could you provide me the information so I can correct a problem that I have had since I installed the cover. Thank you

asked by: RIchard D

0

Expert Reply:

Hey Richard. We've got a couple of replacement seals for the Pace Edwards Bedlocker style tonneau covers. They are the Replacement Bulb Style Tailgate Seal item # PE92TJ and the Replacement Tailgate Top Seal item # PE99CV you were looking at.

As far as replacement caps go, how long is your Sierra's bed and does your Bedlocker cover have the explorer rails built into it with T-slots?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by: Jerred H

0

PE99CV
(click to enlarge)

PE92TJ
(click to enlarge)

Richard D.

2/11/2026

The cover was purchased in July 2024 from Real Truck. It has the bulb tailgate seal. I am not sure how to determine what type of track I have. The seal appears to be fine. The only thing I need is the end pieces of the cover. Please advise what I need to do and if parts are available. Thank you Richard Davis

Jerred H.

2/11/2026

@RichardD Do you know how long your Sierra's truck bed is? I asked because I am trying to narrow down the options for covers so I can see what's available as far as replacement parts go. What did Real Truck say? If you're missing pieces of your cover you may have a warranty claim.

Richard D.

2/11/2026

@JerredH My truck bed is 6 1/2 feet. I did not contact Real Truck because I wasn't aware I was missing the parts. When I contacted Real Truck about the cover leaking, I was told I must have installed it improperly. At that point I just resided myself to having a leaky cover. If there are just two rail types I would not be opposed to simply purchasing both in order to get a sealed cover. Richard Davis

Jerred H.

2/12/2026

@RichardD Thanks for the information! There's two Bedlocker model covers for your 6-3/4' 2024 GMC Sierra 2500. Bedlocker Retractable Hard Tonneau Cover w Explorer Rails item # PE79CV Bedlocker Retractable Hard Tonneau Cover item # PE78CV We don't have any replacement rails for them or a cover/cap but that doesn't mean we can't find them. I went back and I'm pretty sure I found the video you watched that showed the caps you don't have and linked it below. What I'd like you to do, assuming it's the right video, is watch it again and tell me what time in the video you see the caps. I'd also like you to email me a picture or two directly to the email address you receive this response from of your cover and what you're missing.

Helpful Links

tv-review-pace-edwards-replacement-tailgate-seal-pe99cv.aspx

Jerred H.

2/13/2026

@RichardD Thanks for getting those pics around and taking a look at that video again. You have the Bedlocker Retractable Hard Tonneau Cover item # PE78CV and I am surprised to say the least. You're not missing any pieces. There's just a massive gap on both ends of the cover right in front of the tailgate. I linked a demo video below that we did on your exact cover and if you skip ahead to the 4:05 mark you'll see the giant gap that's letting all the water in. As far as solutions go, I do think your Tailgate Top Seal item # PE99CV is about a 1/2" or so short on both sides. That won't fix the gap behind the rails though and I don't have a part to fix that. Was your truck in an accident? The gaps look a bit off and unsymmetrical. It could be an install error too or just the angle of your pics.

Helpful Links

tv-review-pace-edwards-bedlocker-retractable-tonneau-cover-pe78cv.aspx

See All (7) Replies to Richard D. ∨

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Replacement Seals for a Pace Edwards Bedlocker Tonneau Covers

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching