Will Wireless LED Tow Bar Light Work with 2023 Ford Bronco
Updated 02/09/2026 | Published 02/01/2026 >
Question:
The wireless tow brake and turn signal magnetic mount. Will that plug into our 2014 coach and light be mounted on back of bronco and work like it’s wired in correct? As the description says to plug into bronco? Thank you Mike
asked by: Mike R
Expert Reply:
Hey Mike, if you wanted to use the Wireless Tow Bar Light Bar part # LIW-LDTL-7B as a flat tow lighting kit for your Bronco as it's being flat towed behind your motorhome it would work exactly like you would want it. The turn signals of it would flash in unison with your tow vehicle turn signals like you are wanting.
The confirmed to fit your Bronco is a wording error as it would not plug into the Bronco and would instead attach to it with the magnetic base. What tow bar and base plate kit do you have?

Stephen
2/5/2026
Hey, Mike, if you're motorhome has a standard 6 or 7 wire trailer light plug in for the transmitter then you'll be good to go. The trick is finding a flat metal surface to stick the light. I would suggest being careful sticking it on our taking off as the magnets are bare and will scratch paint easily if slide around. I stick a piece of packing tape over mine.


Ken W.
2/5/2026
Hey Mike, Used my light bar on several long trips. Easy setup and have not had an issues with battery on long haul days.

Kevin H.
2/5/2026
While the wireless tow bar light seemed like a good solution for our 2021 LTV Wonder towing our 2024 Chevy Trax, it proved to have some issues. First issue is short battery life, maybe 6 hours at best. If we tow longer than that, no lights. On the road, we have to use inverter for several hours to recharge. Second issue is a possible electronics compatibility with the Transit based Wonder. When the transmitter is plugged into our 7 pin connector, it keeps triggering a warning chime and message that a tail light is out, even when it isn't. That chime can be annoying! We have since switched to conventional wired tow lights.

Product Page this Question was Asked From
Wireless LED Tow Light Bar - Magnetic - Weatherproof - 23" Long - 7-Way Round
- Flat Tow Wiring Harness
- Bypasses Vehicle Wiring
- Removable Tail Light Kit
- Universal Fit
- 7 Round
- Custer
more information >
Continue Researching
- Q&A: Hitch Receiver and Wiring Harness for a 2022 Volkswagen Taos
- Q&A: Is Vevor RN-QVR 7500 Tow Bar Compatible With Blue Ox Base Plates
- Article: Can You Flat Tow a 2025 Cadillac Escalade?
- Q&A: Is RVI Series Breakaway Wireless Adapter Compatible With Curt RVi Series 4 Flat Tow Brake System
- Q&A: Parts Needed to Flat Tow 2025 Lincoln Nautilus Hybrid
- Q&A: Blue Ox Base Plate and Tow Bar Wiring for 2025 Jeep Wrangler Rubicon
- Q&A: How To Adjust Braking Sensitivity Of Curt RVi Series 4 Flat Tow Portable Brake System That Grabs
- Q&A: Flat Tow Lighting Options For A 2026 Jeep Wrangler Sport S
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: We Used 34 RV Tow Bars, and These are the Best for Flat Towing
- Article: Flat Towing Package for 2025 Ford Maverick
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Tow Bar Wiring: Which Wiring Kit is for You?


Tim
2/5/2026
Hello Mike, the way I use it the wireless seven prong plug plugs right in the back wiring harness over a 2017 RV. It works with the brakes and turn signal lights of the RV and works great. As for the magnet light itself, I built a bracket to place the light in the back window of our Jeep so it has no chance of getting knocked off. I don't think it would. Everything works as stated on the etrailer website