Does Curt Brake Controller Install Harness part # C51446 Fit 2025 Ram 1500 Tradesman

Question

Question:

Can you tell me if the curt 51446 wiring harness fits a 2025 Ram 1500 tradesman with factory wiring harness that is plug n play thank you

asked by: Tommy L

0

Expert Reply:

Hey Tommy, yes the Curt brake controller install harness part # C51446 that you referenced does also fit the Tradesman models of the 2025 Ram 1500 like you have. It does allow for a plug and play install of a Curt brake controller. Do you have a Curt brake controller in mind already?

expert reply by: Jameson C

0

Tommy L.

1/26/2026

Thank you for your reply i already have a curt discover next thanks for asking

Jameson C.

1/26/2026

@TommyL Glad to help! Yeah it will work with that!

Answer 1

Hi Donald; the wiring harness that comes with the Curt Echo Under-Dash Bluetooth Brake Controller #C46GV is the Curt Custom Wiring Adapter for Trailer Brake Controllers #C51446. This will allow you to plug your existing Echo into the brake controller…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Does Curt Brake Controller Install Harness part # C51446 Fit 2025 Ram 1500 Tradesman

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching