Roadmaster Adapter for etrailer Invisible Base Plate Kit

Question

Question:

Adapter for roadmaster tow bar to etrailer hitch

asked by: ed h

0

Expert Reply:

Hey Ed! Which Roadmaster tow bar do you have? The correct adapter for the etrailer Invisible Base Plate Kit # e98949 depends on the tow bar. You can choose from the following:

-Roadmaster Tracker, Falcon 2, Falcon All Terrain, Blackhawk, Blackhawk All Terrain, Sterling tow bars with serial numbers up to 14,500 # e98983

-Roadmaster Nighthawk, Sterling All Terrain, Sterling tow bars with serial numbers 14,501 # e98984

-Roadmaster Eagle, Eagle 8000 # e98979

-Roadmaster Falcon 5250 # e98981

expert reply by: Robin H

0

Adapter Brackets
(click to enlarge)

Peter

1/18/2026

The eTrailer Invisible base plate has worked great for us on our 2009 Jeep Wrangler. Had it professionally installed along with the electric brake kit and additional battery trickle charger. Used it for +/- 4K miles last summer in conjunction with the eTrailer SD non-binding tow bar kit (Part # e34ZR. Good combo.

Answer 1

The cost of setting up a 2008 Honda CR-V to flat tow is going to vary quite a bit depending on what you use and how much of the installation process for each item you do yourself versus paying someone to complete. Flat towing is a very expensive…

view full answer...

Answer 2

Hey Ray, The etrailer baseplates #e98965 do not work directly with that Roadmaster Nighthawk. However, there is an adapter we have available for them to work seamlessly. You will want to pair that baseplate with the Roadmaster adapter #e98984. That…

view full answer...

Answer 3

Yes, I will be happy to tell you what you will need to flat tow your 2007 Honda CR-V behind your motorhome. There are 5 major components needed: base plates, tow bar, safety cables, lighting, and supplemental braking. For base plates I recommend…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 6

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 7

Hey Frank! This is a newer product, so there aren't many long-term owner reviews available yet. That said, we have done extensive testing on the Benton MoveHitch #B86VR. A strain gauge was used to measure the forces the carrier experiences during…

view full answer...

Roadmaster Adapter for etrailer Invisible Base Plate Kit

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching