Will Brakes and Hubs from Lippert 5,200 lb Axle Fit etrailer 6k Axle
Updated 01/02/2026 | Published 12/30/2025 >
Products Featured in This Question
Question:
I need to replace the axle beam on a Lippert 5200 axle will the brakes and hub assembly fit on this axle?
asked by: Sam B
0
Expert Reply:
Hi Sam; the hubs and brake assemblies from your 5,200 lb axle will fit on the Trailer Axle Beam with Easy Grease Spindles - 95" Long - 6,000 lbs # e73GR. Make sure your current axle has a hub face length of 95" and an 80" spring center. Also, this uses a # GS-2250DL grease seal so you may need different seals if you currently have the 2.125" inner diameter instead of 2.25".
What happened to your original axle?
expert reply by:
Robin H
0
Product Page this Question was Asked From
Trailer Axle Beam with Easy Grease Spindles - 95" Long - 6,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 6000 lbs
- Spindles Only
- 80 Inch Spring Center
- 95 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: cleaner
- Search Results: trailer axles
- Search Results: brake cleaner
- Shop: Trailer Axle Beam with Easy Grease Spindles - 95" Long - 6,000 lbs
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 6,000 lbs
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Shop: Grease Seal GS-2250DL - Double Lip - I.D. 2.250" / O.D. 3.376" - 5.2K to 8K Axles
- Shop: Leaf Spring Center Tie Bolt with Nut, 3/8" x 3"
- Q&A: How Tight Do Leaf Spring Bolts Need To Be?
- Shop: Trailer Hitch
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Shop: Trailer Wiring
- Video: How To Choose Camper Leaf Springs
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Shop: Brake Controller
- Q&A: Lift Kit Solution to Allow Fifth Wheel Trailer to Sit More Level When Towed
- Search Results: trailer jack
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure Your Trailer Wheel Bolt Pattern




Sam B.
1/2/2026
Ok Thanks and the u-bolts became loose and wore into the axle tube.