Tow Package Recommendation for a 2012 Dodge Caravan

Updated 06/27/2014 | Published 06/26/2014

Products Featured in This Question

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(1240)

$173.79

1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs

(2621)

$12.45

Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K

(3469)

$38.63

Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional

(2763)

$160.52

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(681)

$73.94

Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient

(867)

$100.51

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3398)

$119.84

Question:

Hey , buddy. I talk to the service dept of Dodge. The Caravan , all it needs is the trailer hitch and wiring for the brakes and lights . It does not need an up grade for the transmission cooler . This the question no one could answer , so Im letting you know.

asked by: Edwin R

Expert Reply:

Transmission coolers are often not totally required, but they do help prolong the life of the transmission. It's your call, but it's a cheap investment to help prolong the life the transmission. For a transmission cooler I would recommend the Derale Transmission Cooler part # D13502.

For a hitch I would recommend the Draw-Tite Class III receiver, part # 75579.

You will also need a trailer wiring harness, part # C56331 to provide a 4-pole trailer connector. If the camper uses a 7-way connector and has electric trailer brakes, you would also need a brake controller to actuate them.

Although we have many controllers to choose from, the Tekonsha Prodigy P2 # 90885 would be my recommendation due to how easy it is to use. To install the controller, you would need our Brake Controller Install Kit, part # ETBC7.

Finally, you will need a ball mount, # 2753 and the appropriately sized trailer ball. For a 1-7/8 inch ball, use part # 19260 for a 2 inch ball.

I have linked you to some FAQ articles, installation details and install videos that you might find helpful.