Looking for Replacement Install Hardware for Curt Hitch 13485

Question

Question:

I bought a CURT 13485 Class 3 Trailer Hitch, 2-Inch for my 2024 Hyundai Tucson hybrid, from Amazon. It came without the package of hardware. It looks like I can purchase a hardware set here, but want to be absolutely sure its the right one.

asked by: Ellen R

0

Expert Reply:

Hey Ellen, yes you can get replacement hardware for the Curt hitch you have from us with the part # RHK but before you do that look down into the hitch opening and see if the hardware is stuck down in there as that's where it's usually taped and it's easy to miss.

expert reply by: Jameson C

0

Jameson C.

12/29/2025

Hey Ellen, did you end up finding the hardware taped inside the hitch receiver or did you order the replacement kit? Knowing what worked could help others who run into the same issue with their Curt hitch.

Answer 1

The 3/8" Conical Tooth Washer #01292006-020-01 is the closest we have to a 7/16" inner diameter. We have the 7/16" Lock Washer #5-8 depending on if your application will work with this style washer. Otherwise you should be able to find…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

Hello Shuntaro; it sounds like the weld nuts in the vehicle frame likely have some dirt, rust, or undercoating buildup in them, which is pretty common. We recommend cleaning the threads with a wire brush and using a thread chaser if needed before…

view full answer...

Answer 7

Hey Piotr, thanks for reaching out! The weight ratings between the Curt Trailer Hitch Receiver #C94WR and Towsmart Trailer Hitch Receiver #TS96VR that fit your 2025 Kia Sportage are determined by the testing done according to those manufacturers. I…

view full answer...

Answer 8

Hey Steve, this is a really great question. So the Curt #C94WR and the etrailer part #e38KR are very similar. Only real difference is the finish. The etrailer has a matte finish and the Curt has a gloss finish. Aside from that it's exact same…

view full answer...

Answer 9

Yes, they do John. To add a hitch to your 2026 Kia Sportage hybrid, I recommend the Curt item #C94WR. This hitch is custom fit and bolts to your Kia with included hardware. This is a class III hitch with a 2" receiver. It's going to give you…

view full answer...

Answer 10

Hey Mike, thanks for reaching out. Yes, it will! The Curt Mounting Bracket for 4-Pole Flat Trailer Connector #C42CR will match right up with the Curt No-Drill Bracket #C57202. You won't have to drill any new holes. The picture I included shows…

view full answer...

Answer 11

I may have an option that will work for you, however the Draw-Tite Ultra Frame Class V Hitch, #41947, is a custom fit hitch designed for full size pickup trucks. Frames on trailers are typically wider than frames on vehicles and the frame width can…

view full answer...

Answer 12

Hey Chris, Yes, the trailer hitches you're seeing (listed below) are a confirmed fit for all models of the Kia Sportage from 2023 - 2024. Draw-Tite Max-Frame Trailer Hitch Receiver #DT22MR Curt Trailer Hitch Receiver #C94WR etrailer Trailer Hitch…

view full answer...

Looking for Replacement Install Hardware for Curt Hitch 13485

Product Page this Question was Asked From

Continue Researching