How Far Does Hitch Stick Out On 2025 Subaru Outback?

Question

Question:

How much of the hitch is visible once it’s installed on a 2025 Outback?

asked by: Dennis

0

Expert Reply:

Good question, Dennis. Once the TowSmart # TS34ZR is installed, only the 2-inch receiver tube is visible below the bumper. The cross tube sits tucked up against the frame, giving you that clean, near-factory look. It’s a nice balance between clearance and accessibility - easy to reach for a bike rack or ball mount, but subtle enough that it doesn’t stand out.

If you ever plan to tow, you’ll just need the T-One Wiring Harness # 118467 and Ball Mount Kit # 989891 to complete your setup.

Are you planning to keep it mostly for hitch accessories or occasional towing?

expert reply by: Andrew N

0

Towsmart hitch clearance on 2025 outback
(click to enlarge)

Answer 1

I can happily confirm for you that the Draw-Tite Trailer Hitch #36644 is truly a no-drill install on your 2018 Subaru Crosstrek; it is a bolt-on installation and you will only need to lower your exhaust temporarily in order to install the hitch. For…

view full answer...

Answer 2

The bolts included with the Draw-Tite Class III #75471 Hitch are Class 10.9. They're 10mm in diameter, 30mm long and have a 1.25 thread pitch. If you're needing replacement installation hardware, we can supply a replacement hardware kit for…

view full answer...

Answer 3

For replacement trailer hitch hardware, you will want to use part #RHK. Simply enter the trailer hitch part number and manufacturer name and we will assemble the hardware kit for that hitch for you. This will be the hardware only. If the trailer…

view full answer...

Answer 4

Hey Dennis, thanks for reaching out! We have yet to install the Towsmart Trailer Hitch Receiver #TS34ZR, but it has a similar design to the Curt #C69VV, which we had a chance to install on a 2024 Outback Wagon. This will be the same as your 2025…

view full answer...

Answer 5

Are you looking for the hardware for a Curt trailer hitch receiver that fits yours 2015 Subaru Forester? If so, there are two of them; a Class III, #C13144, and a Class II #C12100. Both use 6 bolts, 6 nuts, and 6 plates. Just determine which on you…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

Hi Jeffrey, For a hitch for the 2026 Subaru Outback Wilderness that installs behind the bumper, I recommend the etrailer Class III Trailer Hitch Receiver part #e25TR. The cross tube is totally hidden behind the bumper, and only the hitch receiver…

view full answer...

Answer 11

That’s smart to check, Mike. Once installed on the 2025 Outback, the TowSmart #TS34ZR places the center of the hitch pin about 6 inches from the outer edge of the bumper. That means most folding bike racks and carriers will clear easily when stowed.…

view full answer...

How Far Does Hitch Stick Out On 2025 Subaru Outback?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching