Can Curt Hitch 11540 be Used with E-Bike Rack

Question

Question:

Can I use the Curt CMF11540 hitch in Germany to hook up an e-bike rack?

asked by: Marion M

0

Expert Reply:

Hey Marion, we carry the Curt Class I hitch part # C11540 that is a could be used with an e-bike rack like the Thule Easy Fold XT part # TH903202 that is also Class I compatible but we don't have a way to ship to Germany and we also don't have a way to know for sure if this fits the German spec versions of the vehicle so I am not sure we are able to be much help for you.

expert reply by: Jameson C

0

Jameson C.

12/8/2025

Hey Marion, were you able to find a hitch that fits your vehicle in Germany for your e-bike rack? Knowing what worked could help someone else trying to set up a similar rack overseas.

Marion M.

12/9/2025

@JamesonC Hi…yes I just had a hitch installed today at U-Haul. Also got the wiring kit for my 2024 VW Jetta SE. However, the technician had a problem due to the LED lights and the wiring is apparently reversed. Do you know of a wiring kit that works with my car model and LED tail lights?? I am shipping my car to Germany (military) and just need the hitch for a bike rack. In Germany bike racks have to have full lights, license plate etc. I do already have an adapter from a 4 Flat to a 13-pin plug. Appreciate the help. I suppose U-Haul gets their parts from e-trailer because he mentioned it. Thanks.

Jameson C.

12/9/2025

@MarionM We actually have an trailer wiring kit that fits your 2024 Volkwagen Jetta SE with the Curt part # C63DQ. This plugs inline with your taillights and is correct configuration for your vehicles taillights to provide a 4-way for your bike rack.

Marion M.

12/9/2025

@JamesonC Thank you. I am currently working with an installer recommended by VW. They ordered this exact part already. Thank you very much for your help. Much appreciated.

See All (4) Replies to Jameson C. ∨

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 9

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

Hey George, for your 2026 Toyota RAV4 Hybrid we have the Curt hitch part #C34FR62ZY as a confirmed fit but it's on a little bit of a backorder at the moment which is why you don't see any hitch options in our fitguide. The hitches from…

view full answer...

Can Curt Hitch 11540 be Used with E-Bike Rack

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching