What is the Bolt Hole Size of the CE Smith Trailer Suspension Shackle Straps CES73FR?
Updated 12/10/2025 | Published 11/16/2025 >
Question:
What is the bolt hole size?
asked by: John D
0
Expert Reply:
Hey John. The CE Smith Trailer Suspension Shackle Straps item # CES73FR has a 9/16" bolt hole size. The distance between mounting holes is 2-1/2" on center and they have a overall measurement of 4" long x 1-1/4" wide x 1/4" thick.
What kind of trailer do you have?
You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.
expert reply by:
Jerred H
0
Product Page this Question was Asked From
CE Smith Trailer Suspension Shackle Straps - 4" Long - Qty 4
- Trailer Suspension Parts
- Shackle Links
- Camper
- Car Hauler
- Utility Trailer
- 2-1/2 Inch Long
- CE Smith
more information >
Continue Researching
- Shop: Shackle Bolt for 1-3/4" Wide Double Eye Springs - 9/16" Bolt Diameter - 3" Long
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Q&A: Suspension Enhancement Recommendation for Trailer with Dexter 2,000 lb Axles
- Q&A: Replacement Parts for 1987 Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Looking For Replacement Shackle Straps For 2016 Carson Trailer
- Q&A: What mounting hardware would I need to install CE Smith Single Axle Trailer Fenders?
- Q&A: Upgrade Kit for 2-1/4 inch Trailer Suspension Shackles
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Replacement 26 Inch Leaf Springs, Bushings, & Wet Bolts For Keystone Trailer
- Q&A: Can I Replace 2-5/8" Long Shackle Straps With 2-1/4" Shackles?
- Article: What Is A Leaf Spring? (Everything You Need to Know About Trailer Leaf Suspension)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Holiday 2025 | Best Gifts for RVing
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Raise Your Travel Trailer Height



Jerred H.
12/8/2025
Hey John, did the shackle straps with the 9/16-inch bolt holes end up fitting your trailer? Sharing how they worked could help others looking for the same setup.