Recommended Hitch for a 2021 GMC Acadia AT4

Question

Question:

I have a 2021 GMC Acadia AT4. What hitch do i need so im still able to hide it behind the fascia/ trim ?

asked by: Dominic E

0

Expert Reply:

Hey Dominic. Since you have the AT4 model of the 2021 GMC Acadia you'll need the Draw-Tite Hitch item # 76023. This hitch is custom fit for your Acadia and bolts to it with included hardware. It's going to mount behind your rear bumper cover and be completely concealed when you cover it with the rear trim piece.

The Draw-Tite Hitch item # 76023 is a class III hitch with a 2" receiver. It has a 4,500 lbs towing capacity and a 675 lbs maximum tongue weight.

What do you plan on using your new hitch for?

You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.

expert reply by: Jerred H

0

2021 GMC Acadia AT4
(click to enlarge)

Jerred H.

12/1/2025

Hey Dominic, how did the Draw-Tite hitch work out on your Acadia AT4—did it stay hidden behind the trim like you wanted? Your experience could make it easier for others looking for a concealed setup on the same vehicle.

Dominic E.

3/13/2026

@JerredH Could you send me a link to the hitch you said would best fit my 2021 Arcadia at4

Jerred H.

3/13/2026

@DominicE I really wish I could Dominic. Since you asked this question in October we've sold out of the only hitch that fits the AT4 model of the 2021 GMC Arcadia. None of our remaining options are going to work for the AT4 model. Draw-Tite's parent company Firstbrands has filed for bankruptcy so we're not getting any new parts in and we're all sold out of their hitch that fits your AT4. The 76023 Draw-Tite Class 3 Trailer Hitch is the manufacturer's part number for it. Hopefully you can use this information to source one online before they're all sold out.

Dominic

3/13/2026

@JerredH Thank you so much for this information

See All (4) Replies to Jerred H. ∨

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 12

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Recommended Hitch for a 2021 GMC Acadia AT4

Featured Help Information

Miscellaneous Media

Continue Researching