Camper Tie Down Brackets that Fits 2016 Chevy Silverado 2500

Question

Question:

I’m buying a 1991 Fleetwood slide in camper. I have a 2016 Chevy Silverado 2500. I need the tie down brackets. Could you please help me?

asked by: Tiffanie P

0

Expert Reply:

Hey Tiffanie, it sounds like you are looking for a set of frame mounted camper tie downs like what we offer from Torklift that fits your 2016 Chevy Silverado 2500 part # TL85PR. This would fit your truck if it had a short bed, crew cab, without running boards or ones that were only cab length and a factory hitch. Is that by chance your truck is configured?

expert reply by: Jameson C

0

Jameson C.

10/30/2025

Hey Tiffanie, did you get a chance to check if your Silverado matches the setup needed for those Torklift tie downs? Once you confirm your truck’s configuration, I can help make sure you’ve got the right fit. Let me know what you find so we can narrow it down.

Answer 1

We do carry Torklift Tie Downs that fit your 2018 Chevy Silverado 2500HD short bed, double cab. For that you'd want the part #TLC2223 for the front and then for the rear #TLC3215. These are custom fit for your truck and by far the best solution…

view full answer...

Answer 2

The correct Rear TorkLift Custom Frame-Mounted Camper Tie-Down for your 2018 Chevrolet Silverado 2500 Short Bed is part #TLC3215. The correct Front TorkLift Custom Frame-Mounted Camper Tie-Down for your 2018 Chevrolet Silverado 2500 Short Bed is part…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Hey Cindy, thanks for reaching out. We may have an extension that will work for you. It will help to know exactly how long of an extension you are needing as this will be one of the main deciding factors. Let me know how long you need it to be in the…

view full answer...

Answer 9

Hey Brad, thanks for reaching out. The factory brake controllers they put in the 2015 GMC trucks are largely incompatible with EOH brakes. That is one of the specific model years we see a lot of issues with since they don't have an EOH mode.…

view full answer...

Answer 10

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 11

Hi Richard! From the top of the shank to the lowest part where the tri-ball sits on the #BWTS20067BMP is 11.125". If you have the balls at max drop with the tallest one hanging down that would be 12.5". We recommend at least 11" of…

view full answer...

Answer 12

Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…

view full answer...

Camper Tie Down Brackets that Fits 2016 Chevy Silverado 2500

Product Page this Question was Asked From

Continue Researching