Replacement Hubs and Brakes for 2021 ATC Trailer
Updated 10/05/2025 | Published 10/02/2025
Products Featured in This Question
Question:
I have a 2021 Atc 24 foot aluminum trailer. The axles are 5200 torsion axles. I need 4 complete brake, hub assemblies. Complete setup that are plug and play.................. Whatcha got?
asked by: David
Expert Reply:
Hi David; for replacement brakes you can use the etrailer Electric Trailer Brakes # AKEBRK-7-SA along with the # BRKH12 if you need new hardware. Do you have a 6 on 5-1/2 bolt pattern on your hubs? You may be able to use the Easy Grease Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K but you will have to determine which grease seal you need.
This hub comes with a GS2250DL which has an inside diameter of 2.25". Some spindles use 10-10 grease seals like # RG06-090 that have a 2.125" ID instead. You can either get this information from the axle manufacturer using the serial number or pull them off and measure with a digital caliper.
(click to enlarge)
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: car tie down straps
- Search Results: trailer jack
- Search Results: weld on d rings
- Shop: etrailer Forged Steel D-Ring Tie-Down Anchor with Weld-On Clip - 1/2" - 4,000 lb WLL
- Shop: etrailer Ratchet Straps with Snap Hooks and Storage Bag - 2" x 20' - 3,333 lbs - Qty 4
- Q&A: Length of Pipe of Round, Pipe Mount Swivel Jack TJP-5001S-B
- Q&A: What are the Jack Dimensions of the Round, Pipe Mount Swivel Jack # TJP-5002S-B
- Q&A: Weld-On Pipe Mount For The TJP-5001S-B Round Pipe Mount Swivel Jack
- Q&A: Does the Footplate on etrailer 3K Trailer Jack TJP-5001S-B Spin when Handle is Cranked
- Q&A: Is Weight Capacity Listed on CargoSmart Forged Steel D-Ring Tie-Down
- Q&A: Dimensions For Round, Pipe Mount Swivel Jack # TJP-5001S-B
- Q&A: Pipe Mounted Trailer Jack For a 3" Pipe Mount and 5,000LB Capacity
- Search Results: 10~10 seal
- Search Results: dexter seal 10 36
- Search Results: dexter 010 010 00
- Search Results: dexter ez lube
- Shop: CargoSmart Forged Steel D-Ring Tie-Down Anchor - Weld On - 1/2" x 3-3/8" - 4,000 lbs
- Shop: Round, Pipe Mount Swivel Jack w/ Footplate - Weld On - Sidewind - 15-1/2" Travel - 3K
- Shop: Square Pipe Mount Swivel Jack w Footplate - Weld On - Sidewind - 15-1/4" Travel - 3,000 lbs
- Shop: Round, Pipe Mount Swivel Jack w/ Footplate - Weld On - Sidewind - 15-1/2" Travel - 7K
- Shop: Erickson Car Tie-Down with Ratchet - 2" Wide x 7' Long - 1,667 lbs
David
10/5/2025
Hi Robin, Thanks so much for the reply. I sent additional photos to your email in order to narrow my options. Thanks David