Pipe Mounted Trailer Jack For a 3" Pipe Mount and 5,000LB Capacity

Updated 06/19/2024 | Published 06/11/2024

Products Featured in This Question

Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 10" Lift - 7,000 lbs

(230)

$127.24

Round, Pipe Mount Swivel Jack w/ Footplate - Weld On - Sidewind - 15-1/2" Travel - 7K

(704)

$74.30

Question:

Hi I am looking for a pipe mounted trailer jack 15 inches, with 3 inch male mating pipe most that I have seen have a 2 inch male mating pipe and my trailer mount won’t fit. I would like a 5000 pound weight capacity too, please. Thanks!

asked by: Zach B

Expert Reply:

The Bulldog Round, Pipe-Mount Swivel Jack # BD198150 you found fits a 3" outer diameter mounting pipe. The jack fits on the inside of the pipe which is a 2-1/2" inside diameter. This jack has a 10" extension or we have our etrailer Jack # TJP-7002S-B which has 15" of lift. This jack fits the same mounting pipe.

expert reply by: Bud M

Zach B.

6/18/2024

Hi Bud, Thanks for the response; I need a 4 inch male mating pipe, not a 3; what would you suggest, please? Thanks!

Bud M.

6/19/2024

@ZachB As I cannot find any jacks with that large of a mating pipe I recommend looking at one of the jacks above with a sleeve pipe to make up the difference. You will be able to find a section of 4" pipe with 1/2" thick wall at a local metal supplier. I would try to find aluminum to make it easier to drill the holes for the locking pin and reduce any rust or corrosion build up inside the pipe.