Recommended Hitch for a 2026 Hyundai Palisade

Question

Question:

Do you have a hitch for a 2026 Hyundai Palisade?

asked by: Steve

0

Expert Reply:

We sure do Steve and congrats on the new SUV! To add a hitch to your 2026 Hyundai Palisade, I recommend the Curt item # C22RJ. This class III hitch has a 2" receiver and will work great for towing or hauling an accessory like a cargo carrier or a bike rack. It has a 5,000 lbs towing capacity and a 750 lbs maximum tongue weight.

What do you plan on using your new hitch for?

expert reply by: Jerred H

0

C22RJ
(click to enlarge)

Steve

11/25/2025

Thank you so much! I'm going to be towing a small utility trailer. Do you have the wiring I need?

Jerred H.

11/25/2025

@Steve You're welcome! We sure do! To tow a small trailer with your 2026 Hyundai Palisade you'll also need the Curt T-Connector Vehicle Wiring Harness item # C94MJ. This will provide you with a 4-way connector capable of controlling your trailer's lighting functions. To round out your towing setup, you will also need the etrailer Ball Mount w/ Pre-Torqued 2" Ball item # e67DR. This towing kit will provide you with a 2" ball, with a 7,500 lbs capacity, and a fixed ball mount with a 2" drop. It also includes a hitch pin and clip.

Answer 1

Hey John, the best hitch we have for your 2026 Hyundai Palisade Hybrid is the Curt part #C22RJ. I like Curt hitches because they have great towing capacities and also have a higher quality control than other options. Will you be doing any towing?

view full answer...

Answer 2

Hi Alfredo! The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C22RJ will indeed fit your 2026 Hyundai Palisade Hybrid. We haven't had the chance to install one of these quite yet, but I checked with Curt and they actually said…

view full answer...

Answer 3

Good questions Chico, thanks for asking! Curt Trailer Hitch #C22RJ doesn't integrate into the bumper like some OEM hitches do. This hitch cross beam is completely hidden under the vehicle and the hitch receiver sits just below the lip of the…

view full answer...

Answer 4

Hey Eddie, the Curt hitch part #C22RJ and the Trailermate part #TMT29FR are both very similar in design and capacity. I really like the Curt hitches and recommend them whenever available but Trailer Mate isn't bad either. If you are wanting the…

view full answer...

Answer 5

Hello Peter, thanks for reaching out. The Curt Trailer Hitch #C22RJ weighs approximately 38 lbs. This hitch is a direct fit for the 2026 Hyundai Palisade, and it installs without and trimming or drilling. All you have to do it temporarily remove the…

view full answer...

Answer 6

Hello Yoann; at this time, the Curt Trailer Hitch Receiver #C22RJ is the only hitch available for your 2026 Palisade. Curt does have a restriction on vertical bike racks so technically it is not compatible with your VelociRAX bike rack. Unless you…

view full answer...

Answer 7

Yes, there is Rob and congrats on the new SUV. To add a hitch to your new 2026 Hyundai Palisade, I recommend the Curt item #C22RJ. This hitch is custom fit for your Palisade and comes with all hardware necessary for installation. The crosstube mounts…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Recommended Hitch for a 2026 Hyundai Palisade

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching