bing tracking image
Q & A Icon

Does Curt Hitch Fit 2026 Hyundai Palisade Hybrid  

Updated 07/30/2026 | Published 01/05/2026

Question:

I have a Hyundai Palisade Hybrid BLUE SEL PREMIUM 7R FWD. VIN KM8RH5SA0TU031065 What trailer hitch number am I looking at? I wasn’t sure if the regular Palisade would be the same as the hybrid.

0

Expert Reply:

Hey John, the best hitch we have for your 2026 Hyundai Palisade Hybrid is the Curt part # C22RJ. I like Curt hitches because they have great towing capacities and also have a higher quality control than other options. Will you be doing any towing?

expert reply by:
0
Jameson C
Johnf profile picture

Johnf

1/13/2026

Yes, I plan on towing my boat and getting a trailer. I hear I can go up to 4000 pounds because it’s a hybrid. So I would most likely want a seven pin harness adapter brake control controller whatever also.

Jameson C. profile picture
Etrailer Expert

Jameson C.

1/13/2026

@Johnf To get a 7-way you'd need to start with a 4-way like the part # C94MJ and then convert to a 7-way with the part # ETBC7 which also comes with everything to wire in a brake controller too. For a brake controller I really like the Redarc Tow Pro Liberty part # RED52VR which only puts a small knob on the dash of the vehicle.
John profile picture

John

7/29/2026

If you want to install this hitch on a Palisade hybrid, you will also need a separate bracket to accept the wiring harness. I am at a Hyundai dealer now and they can not install the OEM harness until they find a bracket that will attach to the vehicle and accept the round 7 pin plug.

Jameson C. profile picture
Etrailer Expert

Jameson C.

7/29/2026

@John is it a bracket they are looking for or is it a harness/connector?
John profile picture

John

7/30/2026

I was shown a picture of the bracket on an OEM hitch. It is the bracket that holds the 7 pin connector to the hitch. The solution they told me about is to use a separate bracket that mounts to the vehicle and hold the end of the harness.
Jameson C. profile picture
Etrailer Expert

Jameson C.

7/30/2026

@John If you can't find that bracket most people have really good luck just attaching the 7-way to bottom lip of the rear bumper fascia. Or you can attach the bracket # C57202 to the crosstube of the hitch and attach the 7-way to it.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>