Availability of Front Hitch for 2025 Nissan Frontier

Question

Question:

I have a 2025 nissan frontier and want a front hitch for my vehicle. do you have a hitch to fit my vehicle?

asked by: Robert F

0

Expert Reply:

Hi Robert; I'm sorry to say there are no custom fit front hitches for your 2025 Nissan Frontier. It looks like the 2025 had a refresh and the changes prevent any front hitches from previous years from carrying over.

I see you were looking at that discussion on the # 65075 and whether or not it would fit the 2025. I can tell you we had a customer who already had this hitch on his older Frontier, upgraded to a 2025, and wasn't able to carry the hitch over to the new truck.

The only solution right now is to take the # E-9 to a local fabricator and have them fashion a custom front hitch for your vehicle.

expert reply by: Robin H

0

Curt E-9
(click to enlarge)

Robert F.

10/1/2025

I saw on your site that the problem was the dimension of width between the tow hooks mounting bolts was increased to 35.25 from 33.6 . So I measured that spacing on my truck and it measured 33.6. My truck was built on 11/2024 . Do you think the new spacing was implemented on a later date?

Robin H.

10/2/2025

@RobertF that is possible, I'm not sure when the actual refresh took place for the Frontier and sometimes it happens somewhere in the middle of model years. You're welcome to try it but I can't guarantee it will fit. If you're really lucky Draw-Tite might have an answer but ever since First Brands bought them response time has been something like 6 months-never for us here.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

Hello Mike, thanks for reaching out. We do offer a few different hitches for the 2026 Subaru Crosstrek, the Curt #C22MJ, the Draw-Tite #76209 and the EcoHitch #EH57CR. All 3 of these hitches place the receiver in virtually the same position beneath…

view full answer...

Availability of Front Hitch for 2025 Nissan Frontier

Products Featured in This Question

Continue Researching