How to Add 10 Foot Propane Hose with Quick Disconnect to Propane Manifold
Updated 09/22/2025 | Published 09/17/2025
Products Featured in This Question
Question:
I have an RV with a propane manifold with an open port that has a plug now. I want to add a quick disconnect with a hose and a mounting kit to the side of my RV and tie it into the manifold. Do you have a kit that comes with a metal mount for the quick disconnect fitting and about 6 of propane hose?
asked by: Anthony S
Expert Reply:
Hey Anthony, what you would need is the adapter part # JR32CR to connect to your propane manifold and then from there you would want the # 100304-120-MBS to provide a 10 foot hose that would connect to it and provide you with a male quick disconnect.
Product Page this Question was Asked From
JR Products RV LP Gas Manifold Hose Adapter - 1/2" x 3/8" SAE - Male Flare
- Propane Fittings
- Adapter Fittings
- 3/8 Inch - Male Flare
- JR Products
more information >
Continue Researching
- Q&A: Plug Needed For A JR Products RV LP Gas Manifold # JR65CR
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Q&A: Propane Manifold to Run Propane Line to Stove in Camper
- Q&A: Do Unused Ports of RV Propane Manifold Have to Be Plugged
- Q&A: Champion Generator Replacement Propane Hose Availability
- Q&A: Looking For Trailer Brakes And Hubs For Dexter RT 3,500 lb Axle
- Q&A: Needed LP Gas Regulator for Vintage Camper That Operates at 11" of W.C.
- Q&A: What Size Fitting Is Needed on RV Propane Hose That Goes from Regulator to Trailer
- Article: RV Propane Troubleshooting | Common Propane Issues and How to Solve Them
- Article: 4-Step Guide to Installing RV Solar Power
- Article: RV Propane 101: How Does My RV's Propane System Work?
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How (and Where) to Connect an RV Propane Grill
- Article: How to Raise Your Travel Trailer Height
Anthony W.
9/22/2025
Thanks Jameson. That gets me the connector into the manifold under the camper and the hose from the manifold to the side of the camper. Now I need a quick-disconnect fitting and a way to mount it to the edge of the camper. An L-shaped bracket that holds the QD fitting and screws into the edge of the camper that connects to the hose you recommended would be ideal.