Trailer Hitch for a 2003 Workhorse 34 Chassis

Question

Question:

What is the width? The outside width of my Workhorse is 34.

asked by: Mark A

0

Expert Reply:

Hey Mark!

The Curt Trailer Hitch Receiver # 14211 is a custom fit hitch and while I'm not sure what the width is on it, I can confidently say you're going to need a universal hitch like the Draw-Tite # 41990-07.

The Draw-Tite installs by welding onto your frame so there won't be any second-guessing if it will fit or not.

What are you planning to use the hitch for?

expert reply by: Jon G

0

Answer 1

I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like yours are multi-fit hitches like the #41990 that has a 16k capacity. This is a weld on hitch that would require either the 7…

view full answer...

Answer 2

Looks like you have a service body truck/van based on your pictures. There are only multi-fit hitches that will fit that type of vehicle. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body…

view full answer...

Answer 3

I checked your order notes and it looks like your ordered the part #41990. You should note that this isn't intended as a front mount hitch and to install it you would normally want the part numbers #4907 for 7 inch brackets or part #4916 for 16…

view full answer...

Answer 4

I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like your Fedex step van are multi-fit RV hitches like the #41990 that has a 16k capacity. This is a weld on hitch that would require…

view full answer...

Answer 5

We don't have a specific V shaped option compatible with your Workhorse Chassis. The only options we have a straight bars like Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide #5350. For your application, it sounds like you will need…

view full answer...

Answer 6

While we do not have a custom fit trailer hitch receiver for your 1989 Grumman Olson, we do still have another alternative. Instead, you'll need to use either the: -7" Weld-On Bracket Kit for Draw-Tite Class V Ultra Frame Service Body…

view full answer...

Answer 7

The distance inside the two mounting flanges that the larger plates attach to on the Draw-Tite #37130 are 35-1/2" apart.

view full answer...

Answer 8

For your 1994 Chevy P30 step van you are going to want a multi-fit hitch as there are no custom fit hitches like the Hidden Hitch trailer hitch that you referenced that are confirmed to fit your van. I would recommend the Curt Hitch part #13703. This…

view full answer...

Answer 9

Your best option is either going to be going with a Curt hitch, #15902, or going with one of the hitches with 16 inch brackets like #41990-16. This hitch is closest to what you need. You will need to have a qualified professional welder perform the…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Trailer Hitch for a 2003 Workhorse 34 Chassis

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching