Will the Parkit360 Force Electric Trailer Dolly Work w/a 4,000 lbs Travel Trailer?

Question

Question:

I have A jayco jayflight SLX 195 rb will the parkit 360 work for this trailer

asked by: Russell R

0

Expert Reply:

It sure will Russel. The Parkit360 Force Electric Trailer Dolly item # PA96VR has a 5,000 lbs capacity. It's going to work great with your Jayco Jay Flight SLX 195RB. It also has both a 2" and 2-5/16" hitch ball included.

What kind of ground are you going to be moving your trailer and how far do you have to go?

expert reply by: Jerred H

0

Jerred H.

9/29/2025

Hey Russel, did the Parkit360 work well with your Jayco Jay Flight? I'm curious about how it handled the ground and distance you needed to cover. Your experience could really help others considering the same setup!

Russell

10/2/2025

@JerredH Used the parkit360 today to park trailer in its winter spot gravel pad in back yard , had to move it on grass did work well had a few wheel spins when in low but found out it was better in high speed , more momentum to keep it going past small dips in yard . Total about 300 ft battery held out well . Did cut down coupler to 18" worked good trailer was more level and still had good clearance for wheels . Might consider getting 3rd wheel adapter to make it easier to get back to front .

Jerred H.

10/2/2025

@Russell That's great to hear! Glad it worked out so well for you.

Answer 1

Russel, absolutely - the Force Electric Dolly #PA96VR is rated for trailers up to 5,000 lbs gross weight and 900 lbs tongue weight, so you’re right in its comfort zone. It works great on firm, level surfaces like concrete and can even handle gentle…

view full answer...

Answer 2

Hey Tom! Great question. The Parkit360 Force Electric Trailer Dolly #PA96VR (5,000 lbs) and #PA46VR (10,000 lbs) will work on an incline. However, if the grade is more than 6% you cannot use the dolly. As long as your driveway is no more than a 6%…

view full answer...

Answer 3

Hey Terry, you’re likely not doing anything wrong. The Force #PA96VR has wide 6-1/2” tires that give great traction, but they don’t pivot sharply. For tight angle turns, it helps to alternate between forward and reverse, “walking” the tongue in…

view full answer...

Answer 4

Yes. If you don't need the weight distribution bars attached to carry the trailer to storage, you can absolutely use just the WD hitch head and ball to tow the trailer. It will work just like a ball mount.

view full answer...

Answer 5

Brian, good question. The Force dolly 5K lbs #PA96VR performs best on paved or packed gravel. If your gravel is loose or deep, the narrow drive tires can dig in, but a few wood boards under the trailer wheels usually solve that. For frequent…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Will the Parkit360 Force Electric Trailer Dolly Work w/a 4,000 lbs Travel Trailer?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching