Cold Brake Wire for a 2019 Jeep Grand Cherokee Limited

Question

Question:

On a 2019 Jeep Grand Cherokee limited, what brake light switch wire should I tap the red brake controller into? I know it needs to be on a Cold wire, but can you inform me as to which wire that is?

asked by: Michael

0

Expert Reply:

Thanks for your question, Michael!

That's really great question that I wish I had an easy answer for. The only thing I could find in my search is that it is possible that it is a dark green wire with a white stripe. HOWEVER, this is not set in stone information. Your wire may very well be a different color, so you will still want to test the wires to find the right one.

You will want to use a multimeter or something like part # PTW2993 to help locate the wire. You'll want to check for which wire only has power when the brake pedal is pressed. This wire is what will get wired into the red wire of your brake controller.

Sorry I don't have an easy remedy for you.

expert reply by: Gwendolyn Y

0

Gwendolyn Y.

9/12/2025

Hey Michael, Did you have a chance to test the wires with a multimeter or the circuit tester I mentioned? I'm curious to know how it worked out for you, as your experience could really help others in a similar situation.

Answer 1

I spoke with my contact at Tow Ready about converter #118158. He said that at most the converter is rated for 2.1 amps per side for brake and turn signals so it would not work for you. I recommend going with a kit that bypasses the vehicle wiring…

view full answer...

Answer 2

Hi Adam, We can get your 2019 Jeep Grand Cherokee set up with a 7-way, though the right parts are going to depend on if you have the factory tow package or not. If you do, all you need is the Curt T-Connector Vehicle Wiring Harness for Factory Tow…

view full answer...

Answer 3

When you are hardwiring a trailer brake controller like the Prodigy P2 #90885 the red wire connection that provides the triggering signal to the controller should be made to the wire on the COLD SIDE of the brake light switch circuit. This is the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Cold Brake Wire for a 2019 Jeep Grand Cherokee Limited

Products Featured in This Question

Continue Researching