What All Is Included In The Box - Universal BrandMotion Wireless Observation Camera

Question

Question:

What’s included in the box? Do I need to buy any extra mounts or cables?

asked by: Greg

0

Expert Reply:

Hey there Greg! The universal Brandmotion Wireless HD Observation Camera System w/ Monitor # BM37SR is a really nice system that comes with everything you'll need.

You’ll get the 7inch HD monitor, suction mount (temp install) and U-bracket mounts (for permanent install), cigarette lighter power adapter, wireless camera with antenna, power harness, universal and pre-wire brackets (trailers prepped for Furrion), and mounting hardware.

The only extras you might want are a microSD card for DVR recording and any additional cameras if you want more than the included rear view. This system can handle up to 4 cameras.

What are you most concerned about when looking at camera systems? Wired vs wireless? Universal vs Custom fit? Let me know and we can make sure this is the right system for you. :)

expert reply by: Andrew N

0

Box contents of brandmotion camera kit
(click to enlarge)

Answer 1

Todd, you’re in luck since Brandmotion Wireless Observation Cam Kit #BM37SR includes an adapter plate and power lead for trailers that are already pre-wired for Furrion-style cameras. You’ll just remove the Furrion cover plate, plug the Brandmotion…

view full answer...

Answer 2

Denise, the universal Brandmotion Wireless HD Observation Camera System #BM37SR system is built for long-body RVs and works with up to 80 feet of range, more than enough for your 38' 5th wheel. It uses a 2.4 GHz digital link, so you’ll get a…

view full answer...

Answer 3

Hey Edward! The reason you're seeing the lights need to be on is because most people tie the Furrion Vision S+ #FR57AD into their running light circuit. Are you wanting the camera on the rear to have constant power? You will have to tie it into…

view full answer...

Answer 4

If you are looking for weight distribution trunnion bars, we do have replacement options. Because you specified square bars that narrows down your system to an Equal-I-zer. We have the Replacement Spring Bar for Equal-i-zer Weight Distribution…

view full answer...

Answer 5

11 inches from the bolt hole centers to the wall of the RV is the standard dimension for installing a 2 bolt toilet like the Dometic part #DOM87FR. You might check again and see if you didn't measure from the bolt centers and instead did from the…

view full answer...

Answer 6

Hey John, thanks for reaching out. Yes, the 7-Way Vehicle Power Adapter for Furrion RV Observation Cameras #FR87PR will work with both the Furrion Vision S and Vision S+ camera systems. The adapter's job is simply to provide a steady 12V power…

view full answer...

Answer 7

Absolutely. The #BM37SR Universal Wireless Camera Kit has a monitor that can pair with up to 4 Brandmotion wireless cameras. That means you can start with the rear view and later add side marker light cameras Brandmotion #BM47SR or even a magnetic…

view full answer...

What All Is Included In The Box - Universal BrandMotion Wireless Observation Camera

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching