SnapPad Jack Pads For Lippert Ground Control 3.0 With 9 Inch Foot Pads on 2021 Grand Design

Question

Question:

Just want to verify that the SP54FR2 will fit my 2021 Grand Design Reflection 340RDS? I am looking to install on my two rear jacks only at this time because I utilize the Anderson Jack blocks in the front. I have the LCI Ground Control 3.0 auto-leveling system with 4-jacks.

asked by: Mark T

0

Expert Reply:

Yep, you're right on the money; the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC358590 does have 9 inch foot pads, so you do have the correct fitting SnapPads:

- SnapPad Jack Pads for Class A and C Motorhomes w/ 9" Round Jack Feet # SP54FR2

Even though the title says "for Class A and C Motorhomes" I did verify with the manufacturer that these are the correct fit for the 9" foot pads of the Ground Control 3.0 system.

expert reply by: Kyle S

0

Answer 1

You are correct the 12V PWM Filter for RV Backup Camera Systems item #VGR64VR will solve your problem. The PWM Filter is basically a capacitor that provides your camera with the necessary power that GM has decided not to provide through their 7-Way…

view full answer...

Answer 2

Depending on the tow vehicle the camera could be getting enough power to turn on and pair but not enough to actually function. If your vehicle has PWM wiring like newer GM or Mercedes vehicles then your running light circuit doesn't send a solid…

view full answer...

Answer 3

Hey Doug, welcome back! Yes, we have the Andersen Ultimate Safety Chain Kit with Clevis Hooks #RM3230. This is the complete kit, Andersen doesn't have the attachments available individually. It is specifically designed for the gooseneck mount…

view full answer...

Answer 4

Unfortunately, there is not Kenny. If your Replacement Front Jack for Lippert Ground Control 3.0 Leveling System item #LC362485 is damaged or not functioning correctly the only option available is to replace it. The Replacement Front Jack item…

view full answer...

Answer 5

Hi Sean, We do offer the Ground Control 3.0 for prepped trailers part number 2021106810 as part #LC52ED. This is going to include the rest of the components needed to complete the system. Since we don't have a video of this kit yet I've…

view full answer...

Answer 6

The Lippert stabilizer jacks like you have use an 6 amp auto reset circuit breaker and a 20 amp fuse or breaker. If you check out the diagram I attached you'll see how it normally would be wired. For a 20 amp breaker you'd need the part…

view full answer...

Answer 7

Hello Johnny, The Lippert Ground Control 3.0 #LC675817 uses mostly sealed landing gear components, so there is not really a way to fully grease the internal gears like you could on some older manual landing gear systems. What you can do is keep the…

view full answer...

Answer 8

Hey Michael, so based on what you mentioned it sounds like you have a standard Lippert/Venture/LCI style landing gear and you have the 5,500 RPM motor. We do have a higher RPM motor that you can replace it with with the part #LC141893 which turns…

view full answer...

Answer 9

Thank you for the pictures, it looks like you have the Lippert Components IDS Touch Screen Transmitter 329164. You can in fact use the Replacement Touchscreen Remote w/ Charger #LC358601 that you were looking at as a replacement option for that…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Paul! The PullRite SuperGlide #PUL43RR (2714) and #PUL73RR (2914) do weigh the same. The main difference is the capacity, which is going to come from the base of the 5th wheel hitch. Since your 2027 Keystone Cougar 316RLS has a GVWR of 12,900 lbs…

view full answer...