bing tracking image
Q & A Icon

Finding Power and Ground Wire for Voyager Wireless Camera System for Airstream  

Updated 08/18/2025 | Published 08/11/2025

Question:

I will be powering my Voyager wireless camera with the wires going to my center running light, however the wires from the Airsteam are white and pale green and the camera wires are black and red. Which wire does the red camera wire go to?

0

Expert Reply:

Hey Gary, while we don't have a wiring diagram for your Airstream I'm pretty confident the white wire of it is the ground and the green is the power wire to use for the red wire of the camera. So black to green for the other connection. In general the color white on RVs is the ground color but you should still use a circuit tester like the part # PTW2992 to test for voltage.

expert reply by:
0
Jameson C
Gary profile picture

Gary

8/12/2025

So to be clear, the white wire from the trailer is attached to the black wire from the camera and the Pale green wire is attached to the red wire from the camera.

Jameson C. profile picture
Etrailer Expert

Jameson C.

8/12/2025

@Gary Yes that is correct.
Gary profile picture

Gary

8/18/2025

@JamesonC Thank you for your prompt reply to my question, your reply was just the encouragement that I needed to successfully complete the installation.
Jameson C. profile picture
Etrailer Expert

Jameson C.

8/18/2025

@Gary Awesome! Glad I could help!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>