How Much Space Do I Need Between a Awning and the Door Frame to Install a MORryde Safe-T-Rail?

Question

Question:

What is the minimum width that is required to install this. I have 3-1/2inch between my entry door frame and my awning. Is this enough room to install this product?

asked by: Brian

0

Expert Reply:

Hey Brian. You need at least 2-1/2" between your awning and the door frame to install the MORryde Safe-T-Rail Telescoping RV Hand Rail item # MR54BR. You'll be good with a 3-1/2" gap.

What kind of trailer do you have?

expert reply by: Jerred H

0

MORryde Safe-T-Rail
(click to enlarge)

Brian

8/11/2025

Great, thanks for the answer. I have a 2022 KZ Durango 321RKT

Reply

Jerred H.

8/11/2025

@Brian You're welcome!

Reply

Answer 1

Hello Chris, For your 2022 Grand Design Reflection 31MB 5th wheel with the MORryde CRE 3000 and wet bolt kit, the right crossmember brace is the MORryde X-Factor Crossmember #MR33WR. It helps stabilize your suspension, reduces stress by up to 94%,…

view full answer...

Answer 2

The Aquashed and the Olefin RV covers both do great in winter applications like yours. Adco has told us that the two lines you mentioned are the best for that type of climate, but overall, I'd give edge to the Olefin like the part #AD47ZR that…

view full answer...

Answer 3

Hey Richard. The difference in the three MORryde hand rails is how far they extend away from the side of your trailer and how long the railing goes down the stairs. The MORryde item #MR34RV extends out 16" from the mounting point and has a…

view full answer...

Answer 4

Hey Woody, thanks for reaching out! The MORryde Safe-T-Rail Telescoping RV Hand Rail #MR54BR is more of a universal installation, and will fit RVs that have flat fiberglass walls. It measures 52.2" tall and there are a few other considerations…

view full answer...

Answer 5

Hi Amanda! There is no reason you couldn't install the MORryde Safe-T-Rail Telescoping RV Hand Rail #MR54BR into a brick surface/wall. But, you will need to go to a local hardware store to get anchors and possibly different hardware to accomplish…

view full answer...

Answer 6

Hey Ken, it should detect the brake style and work automatically. But if your trailer has a solar setup let me know and there may be some extra steps.

view full answer...

Answer 7

Hey Luis! So long as your Keystone has flat fiberglass walls then yes the MORryde Short Safe-T-Rail Telescoping RV Hand Rail item #MR54RV will work with your 5th wheel trailer. It is not designed to be used on corrugated steel walls. This rail…

view full answer...

Answer 8

I'm not quite sure what you got going on but what I can tell you is that in order to install the MORryde Safe-T-Rail Telescoping RV Hand Rail #MR54BR you're looking at, you are going to need: -No trim or obstructions including around a…

view full answer...

How Much Space Do I Need Between a Awning and the Door Frame to Install a MORryde Safe-T-Rail?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching