Wiring Kit Recommendation for a 2021 Chevy Colorado

Question

Question:

Looking for a simple plug in wiring for 2021 Chevy Colorado Z71 with an unpowered converter module. We will only be towing very basic small utility trailer and hubs doesnt want to have to wire to the battery. Is there anything available?

asked by: Debra S

0

Expert Reply:

Hey Debra, thanks for reaching out!

To install wiring on your 2021 Colorado you'll need the 7-Pole and 4-Pole Trailer Connector Sockets w/ Mounting Bracket and Wiring # HM40975-11998. Since your truck didn't come with a factory connector on it, you'll need to hardwire the pigtail that comes with this wiring kit to the existing wiring on your vehicle.

Our video team actually did this exact installation on a 2021 Colorado so I'm attaching that video to this page for your reference.

There aren't any plug and play styles, but this Hopkins kit is the next best thing. Are you planning on installing this on your own, or having a shop do it for you?

expert reply by: Jon G

0

Debra S.

8/7/2025

Thank you. Hubs doesn't want to do it on his own so we will probably take it to a shop. Thank you for confirming.

Jon G.

8/7/2025

@DebraS Happy to help! We have a tool that you can check out at the attached link. It's our installer locator tool and all you have to do is go to the linked page, type in your zip code, and it will show you the shops in your area that we do business with who have said they can install wiring kits. www.etrailer.com/installer/custom-fit-vehicle-wiring

Answer 1

It sounds like you are having trouble removing your weight distribution spring bars from their lift brackets on the trailer frame. When its time to unhitch the trailer and truck what you want to do is use your trailer tongue jack to lift the trailer…

view full answer...

Answer 2

Hey Mel, thanks for reaching out. You are exactly right. The white wire with the ring terminal is the ground. Grab a self-tapping screw and ground it to the frame. Make sure you ground to good clean metal with no corrosion or paint.

view full answer...

Answer 3

Hey Dan, thanks for reaching out! For only the pigtail side of the 7-Pole and 4-Pole Trailer Connector Sockets w/ Mounting Bracket and Wiring #HM40975-11998 you just need the Pollak 4' Pigtail Wiring Harness #PK11998. I've attached an…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Wiring Kit Recommendation for a 2021 Chevy Colorado

Featured Help Information

Miscellaneous Media

Continue Researching