Is The DA75 Demco Drum Brake Actuator DM28CV Supposed To Be Bolted Or Welded On?
Updated 08/15/2025 | Published 07/21/2025
Question:
Is this a weld-on or bolt-on design?
asked by: Felicia
Expert Reply:
Felicia, the Demco Hydraulic Drum Brake Actuator # DM28CV is designed as a bolt-on actuator. It mounts easily to 3inch wide trailer tongues using standard Grade 5 bolts (4-1/2" by 1/2", and it’s often a drop-in fit for replacing older actuators. Sometimes new holes need to be drilled in the trailer, but not always.
That said, you can certainly weld on the actuator/coupler if you really want to. It would just be more work, and also more difficult when replacing it down the road.
Product Page this Question was Asked From
Demco DA75 Trailer Brake Actuator for Drum Brakes - Zinc Plated - 2" Ball - 7,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Boat Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Drum Brakes
- No Lockout
- Demco
more information >
Continue Researching
- Video: Review of Demco Brake Actuator - DA75 Trailer Drum Brake Actuator - DM28CV
- Q&A: Do I Need To Bleed The Brakes After Installing Demco DM28CV Brake Actuator On Trailer?
- Q&A: How To Stop Trailer With Demco DA75 Drum DM28CV From Locking Up Brakes When Reversing Up Driveway
- Shop: Demco DA75 Trailer Brake Actuator for Drum Brakes - Zinc Plated - 2" Ball - 7,500 lbs
- Video: Review of Demco Manual Lock Out Kit Model DA75 - DM93CV
- Shop: Manual Lock Out Kit for Demco DA75 Trailer Brake Actuators
- Shop: Demco DA86 Trailer Brake Actuator - Drum - Zinc - 2" Ball - 8,600 lbs
- Shop: Demco DA86 Brake Actuator for Disc Brakes w/ Lockout and Solenoid - Zinc - 2" Ball - 8,600 lbs
- Video: Review of Demco Brake Actuator - DA75 Trailer Drum Brake Actuator Black - DM88CV
- Article: How to Bleed Your Trailer Surge Brakes
- Shop: Demco DA75 Trailer Brake Actuator for Disc Brakes - Zinc Plated - 2" Ball - 7,500 lbs
- Shop: Demco DA75 Trailer Brake Actuator for Drum Brakes - Black Powder Coat - 2" Ball - 7,500 lbs
- Video: Feature Breakdown: Dexter DX7.5 Drop-N-Go Brake Actuator
- Video: Checking Out the Demco Hydraulic Brake Actuator w/ Electric Lockout
- Shop: Demco DA75 Trailer Brake Actuator for Disc Brakes - Black Powder Coat - 2" Ball - 7,500 lbs
- Video: The Low-Down on the Dexter Zinc-Plated Brake Actuator w/ Lockout Shield
- Q&A: Installation and Mounting for the Demco Hydraulic Brake Actuator
- Video: Detailed Breakdown of the Dexter Brake Actuator with Manual Lockout
- Q&A: How to Bleed Brakes with Demco Hydraulic Brake Actuator
- Article: Holiday 2025 | Staff Picks for Real-Life Adventures
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Q&A: Parts Needed to Add Brakes to Pontoon Trailer With 3,500 lb Axles
- Q&A: Brake Lines for Boat Trailer In Salt Water
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Lighting Requirements
- Article: Trailer Maintenance Schedule
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: Adding Electric Over Hydraulic Disc Brakes
on Brake Actuator
Andrew N.
8/15/2025
Hey Felicia, did you decide to go with the bolt-on installation for the Demco Brake Actuator, or are you considering welding it on instead? I'm curious to know how it worked out for you, as it could really help others in a similar situation.