Replacement Coiled Hose Extension for External RV Shower of TaG NuCamp

Question

Question:

Hello, I need to replace an external shower hose coiled, quick-connect on my 2020 NuCamp T@G. Do you have that part?

asked by: Karen B

0

Expert Reply:

Hey Karen, it sounds like you are looking for the part # EM64FR. This is a coiled hose extension that is designed to fit the quick disconnects on external showers like what you have.

expert reply by: Jameson C

0

Jameson C.

8/15/2025

Hey Karen, did the coiled hose extension work for your NuCamp T@G's external shower? If you need more help or have any other questions, I'm here to assist!

Answer 1

While we do not have anything vehicle specific to your model, we do have the Let's Go Aero ArcHaus Camping Tent #SAR024-031. This is 10' Long x 6' Wide x 6-1/2' tall and has a an interior screen room with floor available in the…

view full answer...

Answer 2

We have just what you need to replace your landing gear motor M9000PK with the #LC196308 and you'd be set! This is a confirmed fit for what you have and is a faster motor too so your jacks will raise and lower quicker.

view full answer...

Answer 3

Here are some things you can try that normally help if RV slide outs won't close. Reset the power to the RV by unplugging it from shore power. Wait a few minutes and plug it back in. Check all fuses and breakers related to the slide outs. Try…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 10

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 11

Hey Bob! We are ahead of manufacturer fitment pretty often, and have confirmed that the Demco Tabless Base Plate Kit #DM38CV will fit the 2026 Maverick Hybrid. Our own etrailer Invisible Base Plate Kit #e96GV shares the same design so you can use…

view full answer...

Answer 12

Hey Will! I would be happy to help you get the best setup for your 2026 Ford Maverick Hybrid. You will need a tow bar, base plate kit, safety cables, wiring, and a supplemental brake system. I recommend the following: -Roadmaster Direct-Connect Base…

view full answer...

Replacement Coiled Hose Extension for External RV Shower of TaG NuCamp

Product Page this Question was Asked From

Continue Researching