Are Separate Turnbuckles Needed for use with Torklift Fastguns

Question

Question:

What turn buckle do I use with forklift fastguns

asked by: Jim

0

Expert Reply:

Hey Jim, the Torklift Fastguns like the part # TLS9522 are actually a turnbuckle and don't require the use of an additional turnbuckle. Were you thinking about what turnbuckles to use with a set of Torklift tie downs?

expert reply by: Jameson C

0

Jim

7/21/2025

I ment what link should I buy to use with the fastguns mine didn’t with them. A camper place set my truck up.

Jameson C.

7/21/2025

@Jim 5/16 inch links like the part # 37201325 would work.

Answer 1

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 2

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…

view full answer...

Answer 7

Hey Lori, thanks for reaching out! The TorkLift Tie Downs #TL87DR are a custom-fit kit, so there’s no drilling required on the truck itself. Everything bolts up to existing holes in the frame, which helps keep the install pretty straightforward. As…

view full answer...

Answer 8

Hey Derrick, thanks for reaching out. We have just the thing! For your 2022 Ford F-350 dually you will need the following: - Access Rockstar Mud Flap for Towing - Full Width - Commercial Grade #A73NG These are specifically fitted for the 2022 F-350…

view full answer...

Answer 9

Hey Matt, so the biggest difference between the Hellwig and Roadmaster sway bars that fit your 2022 Ford F-350 is the diameter of them which is what directly influences how stiff they are. The Hellwigs are a smaller diameter than the Roadmaster so…

view full answer...

Answer 10

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 11

Hey Michael, what you have now is the Norcold N811FRT which measures 60" x 23.5" x 24". The GE Profile part #GE78FR is very similar in size at 23-1/2W x 26-1/2D x 60T Inch and would work great. What happened to the Norcold?

view full answer...

Answer 12

Hi Clint, welcome back The HappiJac Original Turnbuckles for Camper Tie-Downs - Stainless Steel - Qty 4 #LC182898 are likely what you are looking for and will be a good in between option (they are actually pretty nice and should last a good long…

view full answer...

Are Separate Turnbuckles Needed for use with Torklift Fastguns

Product Page this Question was Asked From

Continue Researching