What Size Fuse Goes in the Curt T-Connector Vehicle Wiring Harness on a 2024 Mazda CX-90?

Question

Question:

Hi, I received this harness with no inline fuse installed. Can you tell me what kind of fuse it is. I know its a 15 amp, I can see that in the pictures, but I dont know if it is a mini or micro 2 fuse

asked by: Craig M

0

Expert Reply:

Hey Craig, welcome back. The Curt T-Connector Vehicle Wiring Harness item # C24ZV uses a 15 amp low profile mini fuse.

What are you planning on using your 4-way wiring harness for?

expert reply by: Jerred H

0

Jerred H.

8/15/2025

Hey Craig, did the low profile mini fuse work out for your wiring harness? I'm curious because it could help others who might have the same question.

Answer 1

I checked with Curt and yes, their item #C25FV hitch, does indeed come with the necessary fish wire. It looks like the fish wire was left out by mistake when the hardware was packaged for the new hitch. I have been assured this misstep has been…

view full answer...

Answer 2

Since the Curt 4-way kit part #C24ZV plugs into the factory trailer wiring port it would put the vehicle into trailer mode when towing a trailer like you are wanting it to.

view full answer...

Answer 3

Hello David, thanks for reaching out. Sounds like you are on the right track here. Both the Curt #C25FV (13568) and #C74MJ (13627) will fit all models of the 2024 CX-90 and this includes the PHEV plug-in hybrid model. This is actually a rare case…

view full answer...

Answer 4

We do have a 4-way trailer wiring harness that fits your 2024 Mazda CX-90, and I verified directly with the manufacturer for you the correct part number is the following: - Curt T-Connector Vehicle Wiring Harness #C24ZV This will pair superbly with…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

What Size Fuse Goes in the Curt T-Connector Vehicle Wiring Harness on a 2024 Mazda CX-90?

Continue Researching