How To Mount And Use Redarc Tow Pro Link On 2023 Jeep Gladiator Rubicon

Question

Question:

Can I mount the Tow-Pro Link on the dash on my 2023 Jeep Gladiator Rubicon and still use my phone to control it?

asked by: Danielle

0

Expert Reply:

Hey Danielle. The Redarc Tow-Pro Link # RED57AR was designed with clean installs in mind. Tyler, one of our customers, mounted his on the dash of his Gladiator and paired it with the Redarc app in under 15 minutes. The module itself plugs in behind the 7 way outlet at the back of the truck, and the remote can be hidden out of sight or mounted anywhere you'd like in the cab and will still work flawlessly. You can control the gain and brake override / sway control through the mounted remote, but more features are available when using the app, such as checking to make sure the 7 way functions are all working properly.

Send us a photo of your dash if you need help picking the perfect mounting spot for the button.

expert reply by: Andrew N

0

Redarc Tow Pro Link Mounted
(click to enlarge)

Sarah P.

7/7/2025

I’m considering this for my 2023 Wrangler 4xe which shares a lot with the Gladiator. Does the Tow-Pro Link still work if you lose phone connection mid-trip? We’ll be heading into areas without much cell coverage and I want to make sure the brakes stay active even if Bluetooth drops.

Andrew N.

7/7/2025

@SarahP That’s a great point, Sarah, and yes , if your phone disconnects, the Tow-Pro Link will continue operating with your last used settings. The controller stores that info internally so trailer braking won’t suddenly stop if you lose signal or battery. You won’t be able to make adjustments from the app while disconnected, but the manual override button will still function normally. This setup has been especially popular with overlanders and folks going deep into remote areas; it's built to keep working even when your tech doesn't. Just make sure everything's paired and working before you hit the trail and you'll be good to go. Let us know what you're towing behind the 4xe!

Answer 1

Hey Dalton, the best brake controller solution for you would be the Redarc Tow Pro Link part #RED57AR. This installs inline with the 7-way at the rear of the truck and comes with a remote so there's no modification of the vehicle at all to…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 9

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 10

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 11

Hi Jeff, welcome back and sorry to hear that gave you so much trouble. The Redarc Tow-Pro Link Bluetooth Brake Controller #RED57AR will work on your Silverado. This plugs in-line at the back of your 7-way at the rear of the truck. You can either…

view full answer...

Answer 12

Hey Scott! Your 2026 Ford Ranger may or may not have a brake controller port/plug, even with the tow package. There will be four wires coming out of a large wire harness by the driver side firewall, left of the brake pedal, which can be wired to the…

view full answer...

How To Mount And Use Redarc Tow Pro Link On 2023 Jeep Gladiator Rubicon

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching