Recommended Hitch for a 2025 Dodge Durango
Updated 08/07/2025 | Published 07/04/2025
Products Featured in This Question
Question:
I want to install a trailer hitch with appropriate lights to my 2025 Dodge Durango Durango GT, 3.6L, V6, VIN 1C4-RDJDG3SC-507047. I plan to buy a trailer that will carry at least two, up to four 12 ft × 50 lb each kayaks. Please advise what hitch you recommend and if there are any installing issues Im hoping there are no issues.
asked by: Pennytiernan
Expert Reply:
Congrats on the new SUV. Does the 2025 Dodge Durango GT have the bumper cutout on it for the factory hitch? If so the best one for your Durango is going to be the Draw-Tite item # DT38MR. This hitch installs behind your rear bumper and is pretty similar to the factory one. The only difficulty you'll encounter installing this hitch is removing the rear bumper cover.
If your Durango does not have the bumper cutout, I recommend our etrailer Hitch item # e98901. This hitch attaches to your Durango's frame. The 2" receiver will sit right below your rear bumper. It's a pretty straight forward install, so no bumper removal. The hitch will just bolt to the frame.
I have linked installation videos for both hitches below so you can see how to get them set up.
To add a 4-way connector for pulling a kayak trailer, you'll need the Curt T-Connector Vehicle Wiring Harness item # C56336. This custom-fit T-connector plugs into your Durango's wiring harness, which is located behind the tail lights.
To round out your towing setup, I also recommend the etrailer Ball Mount w/ Pre-Torqued 2" Ball item # e67DR. This towing kit will provide you with a 2" ball, with a 7,500 lbs capacity, and a fixed ball mount with a 2" drop. It also includes a hitch pin and clip.
(click to enlarge)
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV- 2"
- Trailer Hitch
- For Towing
- Class IV
- 900 lbs TW
- 7500 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 1125 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Best Hidden Trailer Hitch Recommendation for 2020 Dodge Durango
- Article: Trailer Wiring Diagrams
- Q&A: Does the Blue Ox Trailer Hitch BLU46HR Fit a 2-Row 2025 Jeep Grand Cherokee L?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Trailer Hitch and Wiring for 2018 Dodge Durango without Tow Package
- Q&A: Recommended Hidden Trailer Hitch and Vehicle Wiring Harness For 2021 Dodge Durango
- Q&A: 4-Way and 7-Way Bracket that Fits 2021 Jeep Grand Cherokee
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What Hitch and Wiring do I Need for My 2021 Jeep Grand Cherokee Laredo X?
- Q&A: Will Draw Tite DT38MR Fit 2015 Grand Cherokee Without Removable Fascia Cover?
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Hitch Installation Tips
Jerred H.
8/7/2025
Hey, how did the hitch installation go on your Durango? Did you find the installation videos helpful for setting everything up? I'm curious to know how it worked out for you, as it could really help others in a similar situation!