Will Leer Hard Folding Tonneau Cover for a 2025 Ram 3500 Fit with a 5th Wheel Towing Setup?

Question

Question:

can i get the Measurements for each panel and for the height of them stacked up laying flat? Are there any other quad covers like this one? I have a 2025 ram 3500 64inch bed. I want it to fit so I can pull a 5th wheel with a gen Y executive hitch.

asked by: LaMarr T

0

Expert Reply:

Hey LaMarr, thanks for reaching out!

Each panel is about 1" thick for the Leer Hard Tonneau Cover # LE59FR that fits your 2025 Ram 3500. When they are all stacked together you're looking at about 4-1/2" of height overall, and there is a 51" gap from the rearmost part of the folded up cover to the tailgate - this should be more than enough room for you to be able to tow a 5th wheel trailer, but you can also check this on your end just to be sure. There are a handful of quad-fold tonneau covers for your truck, and they will all have generally the same dimensions.

If you're wanting hard tonneau cover alternatives, I recommend checking out the BAK Revolver X4s # BAK64ZR that rolls up towards the cab, or the Pace Edwards UltraGroove # 311-KRD7833 that retracts into a 9-1/4" tall x 9-3/4" deep canister.

Which one of these is the most appealing to you?

expert reply by: Jon G

0

Jon G.

9/2/2025

Hey LaMarr, did you find the right tonneau cover for your Ram 3500 that works with your Gen Y executive hitch? I'm curious because your choice could help others with similar towing setups.

Answer 1

Thanks for your question, Ken. My search hasn't turned up a solid answer for you unfortunately. I was able to find a video on Leer's website and it shows a side profile of it folded up (there's a snip of it below for you). Comparing their…

view full answer...

Answer 2

The easiest option is to use a ladder rack with kayak carriers so that you can carry your kayaks above your bed. The Leer Hard Tonneau Cover - Quad Fold #LE59FR sits inside the truck bed rails so if you want to use a ladder rack, you need one that…

view full answer...

Answer 3

Waylon, I'm not 100% sure because it hasn't come up before and we don't have one to test, but I did some research and it looks like from previous owner's who've tried this, it does block the cargo view. I'd instead recommend…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Hey Tim, the Brandmotion FullVUE Digital Rear View Mirror with HD Backup Camera #BM86YR that you referenced does come with a camera in the third brake light/CHMSL location that you asked about. I attached a picture that shows the contents of the kit…

view full answer...

Answer 10

Hi Fred! The Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F24XV will indeed fit your 2025 Ram 2500 with the factory puck system. The only vehicles it won't fit are ones that have the factory…

view full answer...

Answer 11

Hey Kim, thanks for reaching out. The Firestone Ride-Rite Air Bags with Easy Mount Compressor #F24XV do fit your 2020 Ram 2500 with rear coil springs, but the hang-up is the under-bed gooseneck hitch. On your truck, the air bag brackets and the…

view full answer...

Answer 12

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Will Leer Hard Folding Tonneau Cover for a 2025 Ram 3500 Fit with a 5th Wheel Towing Setup?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching