Are All TorkLift Locking FastGun Turnbuckles The Same Length

Question

Question:

Are all torklifts fastguns the same length and you adjust to your application?

asked by: Todd T

0

Expert Reply:

Hey Todd, great question! There are actually two different lengths. A set of turnbuckles like # TLS9529-2-LK or # TLS9522-2-LK comes with four of the long-range which reach 25" - 43". There are also short-range which reach 14" - 21-1/2" and are designed for bed-mounted instead of frame-mounted tie-downs. You can see these with the # TLS9526-27-LK and # TLS9520-22-LK which include both lengths or on their own with # TLS9520.

Do you already have tie-downs for your truck?

expert reply by: Robin H

0

TorkLift Locking FastGun Turnbuckles
(click to enlarge)

Robin H.

9/2/2025

Hey Todd, did you decide on which length of FastGun turnbuckles to go with for your truck? I'm asking because knowing your choice could help others who are trying to figure out the right fit for their setup.

Todd T.

9/4/2025

@RobinH It depends on your set up and mounting points as i have a flatbed and longer fast guns are required for front mounts while shorter ones for the rear mounts. A person needs to measure for their set up

Russ L.

5/7/2026

I have converted from frame mounted to bed mounted camper. Is there any way to shorten the longer FastGun turnbuckles?

Answer 1

I'm going to assume that you have the factory trailer hitch receiver on your 2021 Ford F-350 as most have this hitch (if not, please let me know), and in regards to fit, the best option for your '21 F-350 short bed is going to be from…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 7

Hello Travis, Thanks for writing in! Your father-in-law's Demco Autoslide 5th Wheel Trailer Hitch for Dodge Ram - Single Jaw - Above Bed - 18,000 lbs #DM59XV is built to mount to industry-standard above-bed rails, so it won't drop right into…

view full answer...

Answer 8

Hey Don, thanks for reaching out! The correct fit for your 2024 Ford F-250 with the Tremor package is the Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR. I confirmed with my contact at Hellwig that this will fit specifically with your Tremor…

view full answer...

Answer 9

Hello Mel, great question! Yes, the Torklift tie downs part #TL66FV will fit your 2006 GMC Sierra 2500HD crew cab with the 8 foot bed, provided your truck does not have running boards or cab length boards that extend under the bed, and you are not…

view full answer...

Answer 10

Hey Michael, this is a great question but the difference between the TST TPMS part #TST44VR and the part #TST-507-RV-4-C is just the display. The part #TST-507-RV-4-C is a display with buttons along the side of it it to make changes whereas the part…

view full answer...

Answer 11

Hi David, I just want to make sure we're talking about the same type of hitch. The B and W Conversion Hitch part #BW55RV is designed to replace the pin box on a fifth wheel trailer and convert it to a gooseneck connection. Since your 2022 ATC…

view full answer...

Answer 12

Hey Lori, thanks for reaching out! The TorkLift Tie Downs #TL87DR are a custom-fit kit, so there’s no drilling required on the truck itself. Everything bolts up to existing holes in the frame, which helps keep the install pretty straightforward. As…

view full answer...

Are All TorkLift Locking FastGun Turnbuckles The Same Length

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching