The built-in, quick-release levers on these turnbuckles make it fast and easy to secure your truck bed camper to your vehicle. Designed for use with bed-mounted camper tie-downs. Turnbuckles extend from 14" to 21-1/2".
Features:
Specs:
Standard turnbuckles have to be manually tightened, which can be a bit of a chore. TorkLift FastGun handles eliminate this difficult step. Just hook one end of each turnbuckle onto your camper and hook the other end onto the camper tie-downs that are mounted to your truck's bed. Then, to tighten the turnbuckles, flip the lever-action handles down - it's that simple. Pins are included to secure the handles in place, ensuring that your tie-down system remains tight and secure. For additional security and peace of mind, use TorkLift's FastGun pin locks (TLS9500 - sold separately) in place of the pins to more effectively lock the system down.
When you reach your campsite and you're ready to set up, just remove the pins (or locks), and flip the FastGun handles up to release the tension on the turnbuckles. With the tension released, you can quickly and easily remove the turnbuckles, activate your jacks, and set up your camper. This quick-disconnect feature is also great if one of the attached turnbuckles covers your truck's fuel tank door. No need to manually twist an older style turnbuckle and remove chains to disengage the entire system. Just pop the FastGun handle up, unhook the turnbuckle so you can move it out of the way, and fuel up.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're gonna take a look at the TorkLift FastGun stainless steel turnbuckle for bed-mounted camper tie downs. This is for a quantity of two. Now standard turnbuckles that are on your camper have to be manually tightened, which can get to be a bit of a chore. What's nice with these, these FastGun built-in quick release levers on these turnbuckles make it very fast and easy to secure your truck bed camper to your vehicle.Basically all you have to do is open that up, hook this one end to your camper, put the other end right here to the camper tie downs that are mounted on your truck's bed. And to tighten the turnbuckles, you just flip this lever action handle down. That simple.
They do include pins that you can put right through there. These are to secure the handles in place, ensuring that your tie down system remains tight and secure.Now these are designed for use with bed-mounted camper tie downs which we do sell separately on our website, so basically also when you reach your campsite, you're ready to set up. All you have to do is just remove the pin, flip the FastGun handle up to release the tension on the turnbuckles, and then with that tension released, you can quickly and easily remove the turnbuckles, activate your jacks and set up your camper.Now these turnbuckles secure your camper to the tie downs that are mounted on your truck. This is for a quantity of two. It does require two additional turnbuckles to secure all four corners of your camper.
The lever action handles right here will make the turnbuckles easy to operate. Push down on the handle once the hooks are in place to tighten. Pop the handle up to release it. It is a spring-loaded design, which will help produce stress on the tie down points.The spring tension indicator right here on both driver's and passenger sides gives you a nice simple setup. They are lockable.
Instead of a pinning clip, you could put a lock through there if you want extra security. They're made of a high-impact stainless steel construction which is durable and rust-proof, have a nice gray powder coat finish. The kit includes everything shown here on the table, the two FastGun turnbuckles, the two half-inch threaded hook bolts that I've already installed, the hardware which is all included I've used to install it, two quick links, and then two locking pins.These parts are made in the USA. Again, the applications, these are for bed-mounted tie downs for your truck campers. The turnbuckle reach on this is anywheres from 14 inches minimum up to 21-1/2 inches maximum.
And again, it's for a quantity of two.That should do it for the review on the TorkLift FastGun stainless steel turnbuckles for bed-mounted camper tie downs, quantity of two.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.