PullRite SuperGlide Capture Plate for Curt L05 Air Ride Pin Box

Question

Question:

Will this fit Curt L05 airride pin box. Model 158778

asked by: Joe J

0

Expert Reply:

Hey Joe! The # PUL98RR is for the Flex Air so it is not the right one. What you need instead is the PullRite SuperGlide Quick Connect Capture Plate for Trailair Air Ride Pin Boxes # PUL97ZR. What kind of 5th wheel do you have?

expert reply by: Robin H

0

PullRite Capture Plate
(click to enlarge)

Robin H.

9/8/2025

Hey Joe, did you find the PullRite SuperGlide Quick Connect Capture Plate for your Trailair Air Ride Pin Box worked out for your setup? I'm asking because your experience could help others in a similar situation.

Answer 1

Hey Bruce, I would recommend going with the Demco Hijacker Autoslide part #DM8550024 that fits directly to the OEM pucks of your 2022 Ford F-350. The reason I like the Demco better than the Pullrite is because the Demco has an adjustable height…

view full answer...

Answer 2

Hey Dan, for your 2024 Ford F-350 that has the OEM pucks the correct Pullrite sliding hitch you need is the part #PUL73RR. The #PUL63RR fits the standard above bed fifth wheel rails that are 22 inches apart on center. What fifth wheel do you have?

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Hey Robert, congrats on your new 5th wheel trailer! It is highly recommended to use a sliding hitch like the B&W Companion item #BWRVK3370 the shorter 6-3/4' bed on your 2026 Ford F-350. The slider will ensure you have clearance when making…

view full answer...

Answer 8

With a 2022 F350 short bed, hitting the top of the bed rails should not be an issue with most campers. Turning clearance however, will certainly be a factor. That is one advantage of the Andersen Ultimate hitch #AM3200, as it provides a 9"…

view full answer...

Answer 9

Hey Paul, we have great hitch solutions for the OEM pucks of your 2024 Ford F-350 short bed but whether or not you need a slider hitch is going to be based on the design of the trailer you plan to tow. Normally with a short bed truck you need a…

view full answer...

Answer 10

Since we don't carry the PullRite line I can't really speak to their quality but from what I can see from there website their 2900 model is fairly similar to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV. Both hitches offer 14"…

view full answer...

Answer 11

Hello Branden, Great question. I recommend going with the B&W Companion OEM 5th Wheel Trailer Hitch w Slider for Ford Towing Prep Package - Dual Jaw - 20K #BWRVK3370 because it will go right into your puck system. The Patriot does not have that…

view full answer...

Answer 12

Hey Rod, thanks for reaching out. Yes, it will! The Curt Helux Shock-Absorbing 5th Wheel Pin Box #C83RJ will indeed work with the Demco Autoslide 5th Wheel Hitch #DM8550038. Just make sure you also use the Demco Autoslide Locking Plate for Lippert…

view full answer...

PullRite SuperGlide Capture Plate for Curt L05 Air Ride Pin Box

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching