Are the Loadstar 4.80-12 Bias Trailer Tire and the CE Smith Offset Spare Tire Mount Compatible?
Updated 06/06/2025 | Published 06/04/2025 >
Products Featured in This Question
Question:
I am in the market for a couple of tires and a tire mount for my jet ski trailer. Currently, the trailer has a couple of Carlisle 4.80x12 tires with 5 lugs. I was looking at your Loadstar 4.80-12 Bias Trailer Tire with 12 Galvanized Wheel 5 on 4-1/2, Part Number: AM30670 and your 27310G Galvanized Steel Offset Spare Trailer Tire Carrier by CE Smith for 4- and 5-lug wheels, Item CE27310G. Could you let me know if the tires and mount are compatible, and if the Loadstar tires are the same as my current ones?
asked by: Adin N
Expert Reply:
Hey Adin, thanks for the information. The Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel item # AM30670 is indeed compatible with the CE Smith Offset Spare Tire Mount item # CE27310G. This is a great combo that will make storing a spare convenient. The galvanized finish on both the spare tire mount and rim will keep the rust away.
The Loadstar 4.80-12 Bias Trailer Tire item # AM30670 is about as comparable to a Carlisle 4.80 x 12 tire as you can get. This would be a great spare or a replacement for one of your current wheel and tires.
What kind of jet ski trailer do you have? You can add this information and any other questions you have in the box below that says Reply to Jerred H.
Product Page this Question was Asked From
Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 4.80-12
- 12 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Kenda
more information >
Continue Researching
- Search Results: roller shaft
- Shop: Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: CE Smith Roller Shaft for Boat Trailers - Zinc-Plated Steel - 11" x 5/8" - Qty 1
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B
- Video: All About the Yates Endcap for Boat Trailer Rollers
- Shop: Boat Trailer Guide-On Roller, 2-1/2" Diameter x 12"Long by Dutton-Lainson
- Shop: Rubber End Cap 2" for 1/2" Shaft by Dutton-Lainson
- Shop: Roller Shaft with Cap Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 5-1/4" x 5/8"
- Shop: Roller Shaft with Cap Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 12-3/4" x 1/2"
- Search Results: spare tire mount
- Q&A: Replacement Hubs for a Triton 08351 PWC Trailer Axle
- Search Results: bearing buddy
- Video: Review of Dexter Trailer Hubs and Drums - Galvanized Pre Greased Trailer Idler Hub Assembly - DX77UR
- Search Results: 480 x 12 spare tire cover
- Video: CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles Spec Review
- Q&A: Looking for a Bolt-On Jack That is Less Than 11 Inches When Attached
- Video: Feature Review CE Smith Offset Spare Tire Mount
- Video: Review of etrailer Trailer Hubs and Drums - Galvanized Idler Hub - AKIHUB-545-2-G-EZ-2K
- Search Results: hub grease
- Search Results: 48 x 12 trailer tires
- Search Results: carry on
- Video: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles Spec Review
- Shop: Spare Tire Cover
- Q&A: Spare Tire Cover for 4.80-12 Trailer Tire
- Q&A: Spare Tire Cover Recommendation for a 4.80-12 Tire
- Video: Hands-On with the Brophy Circuit Tester for 4-Pole Flat Trailer Connector
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Q&A: Is There a Replacement Handle For Extreme Off-Road Ratcheting Trailer Jack ORJW1SU



Adin N.
6/6/2025
The trailer is a Load rite galvanized single PWC.